M300 owners manual - abletrader.com

Owner´s Manual Permobil M300
Design and Function (R-net)
R-Net control panel LED
Mode
With the Mode key the user can scroll between the control system’s available
operating modes. The available modes depend on the programming and on
which other output devices are connected to the control system.
Hazard lights*)
This key activates and deactivates the wheelchair’s hazard lights. Hazard lights
are used when the wheelchair is stationary in a position which may represent a
risk or an obstacle for others. Press this key to activate the hazard lights. Press
it again to deactivate them. When the hazard lights are active, the indicator lamp
next to the control key flashes in time with the wheelchair’s direction indicators.
Lights*
This key activates and deactivates the wheelchair’s lights. Press this key to
switch on the lights. Press it again to switch them off. When the lights are activated,
the indicator lamp next to the control key also lights up.
Indicators, left*
This key activates and deactivates the wheelchair’s left-hand direction indicators.
Press the key to activate the indicators. Press it again to deactivate them. When
the indicators are active, the indicator lamp next to the control key flashes in time
with the wheelchair’s left-hand direction indicators.
Indicators, right*
This key activates and deactivates the wheelchair’s right-hand direction indicators.
Press the key to activate the indicators. Press it again to deactivate them. When
the indicators are active, the indicator lamp next to the control key flashes in time
with the wheelchair’s right-hand direction indicators.
* Applies only if the wheelchair is fitted with lights.
59