0-1 NOVA-LUKE Motherboard 1

NOVA-LUKE
• 2 x IDE Interface connectors (40-pin and 44-pin)
• 1 x Inverter power connector
• 1 x IR interface connector
• 1 x Keyboard/mouse connector
• 2 x LCD LVDS converter module connectors (connect to the daughterboard)
• 1 x PC/104-Plus connector (PCI interface)
• 2 x PC/104 connectors (ISA interface)
• 1 x PCI slot
• 1 x Parallel port connector
• 1 x Power switch connector
• 1 x Reset switch connector
• 1 x RS-232/485 serial port connector
• 5 x RS-232 serial port connectors
• 2 x SATA connectors
• 4 x USB connectors
• 1 x VGA connector
The NOVA-LUKE has the following connectors on the board rear panel:
• 2 x Ethernet connectors
The NOVA-LUKE has the following onboard jumpers:
• Clear CMOS
• CF card setup
• LCD voltage setup
• RS-232/485 COM2 setup
• RS-422/485 COM2 setup
• COM2 voltage setup
1.2.2 iLUKE Daughterboard Connectors
Figure 1-3 shows the connectors on the front side of the iLUKE expansion daughterboard.
Page 20
IEI ® Technology, Corp.