GTO/PRO GP-SW100 - Gate Openers | Access Controls
GTO/PRO GP-SW100 - Gate Openers | Access Controls
GTO/PRO GP-SW100 - Gate Openers | Access Controls
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Removing the Operator Housing<br />
Before you can gain access to the operator frame and its mounting holes, the housing will have to be<br />
removed from the operator.<br />
1. Remove the (2) 3/8” allen bolts and (2) m8 washers from the operator housing (this hardware is<br />
located on each side of the housing).<br />
2. Lift the housing off the operator and set it aside.<br />
Allen Bolts<br />
with 5mm key<br />
Washers<br />
Mounting the Operator<br />
1. Lift the operator and align its mounting holes over the 3/8” diameter concrete mounting anchors.<br />
2. Lower the operator into position and fasten it to the mounting anchors with (4) 3/8” washers and<br />
nuts (not provided).<br />
12