04.03.2015 Views

GTO/PRO GP-SW100 - Gate Openers | Access Controls

GTO/PRO GP-SW100 - Gate Openers | Access Controls

GTO/PRO GP-SW100 - Gate Openers | Access Controls

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Important Safety Instructions<br />

Warning Labels<br />

These warning signs and labels should be found at the locations specified below. If any of them are missing,<br />

immediately contact your installer for replacements.<br />

!<br />

WARNING<br />

Moving <strong>Gate</strong> Can Cause<br />

Injury Or Death<br />

1. KEEP CLEAR! <strong>Gate</strong> may move at any time.<br />

2. Do not allow children to operate gate or<br />

play in gate area.<br />

3. This gate is for vehicles only. Pedestrians<br />

must use a separate entrance.<br />

Warning signs (2) to be installed on each side of the gate<br />

(3–5 feet above the bottom of the gate)<br />

C<br />

LISTED<br />

#xxxxxxx<br />

<strong>GP</strong>-<strong>SW100</strong><br />

Conforms to UL 325 STANDARDS<br />

Maximum <strong>Gate</strong>: 1200 lb. (544.3 kg); 20 ft. (6.1 m)<br />

US Voltage: 110 Vac; Frequency: 60 Hz; Power: 300 W<br />

Class I, II, III and IV Vehicular Swing <strong>Gate</strong> Operator.<br />

Serial Number: XXXXXXXXXX<br />

TO MANUALLY OPEN AND CLOSE THE GATE:<br />

1. Turn control box power switch OFF.<br />

2. Disconnect opener arm from gate brackets.<br />

3. Pull opener open.<br />

Disconnect operator ONLY when the power switch is OFF<br />

and the gate is NOT moving.<br />

<strong>GTO</strong>, Inc. Tallahassee, Florida USA<br />

Product identification and manual operation instruction<br />

label (1) installed on cover.<br />

6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!