MS Series Owner's Manual - Magnum Energy

Appendix A - Specifications
A-4 Optional Equipment/Accessories
The following Magnum Energy components are available for use with the MS Series inverter/Charger.
Some of these items are required depending upon the intended use of the inverter.
MMP Series Enclosures
The MMP175-30D. MMP175-60S, MMP250-30D and MMP250-60S enclosures are for single inverter
applications. The MMP Series enclosures have been specifically designed to combine all of the major
components required for a renewable energy system - inverter/battery disconnect, AC overcurrent
protection, grounding connections and a full system inverter bypass switch as a convenient way to
isolate the inverter for battery maintenance - into a single, easy to install pre-wired enclosure.
MP Series Enclosures
The MPSL, MPSH, MPDH enclosures have been specifically designed to easily combine multiple
inverters. The MP enclosures feature convenient front mounted AC and DC connections and easy
panel operation. Choose the MP model based on your power capacity needs. Each model is expandable,
start with the base model and just one inverter and in the future add another inverter
- up to four inverter’s total depending on your model - with ease, using the MPX Series expansion
boxes.
Remote Switch Adapters
The ME-RSA TM and ME-RSA-M TM pigtail adapters allow the inverter to be remotely switched on and
off - with or without the ME-RC remote display.
Advanced Remote Control
The ME-ARC Remote Control Panel uses an LCD screen and “at a glance” LEDs to provide operating
information and allow advanced features to be configured (requires Magnum Inverters with advanced
configurable features). This LCD remote control also provides advanced monitoring/troubleshooting
and includes a FAVS button to access your favorite features quickly.
Standard Remote Control
The ME-RC Remote Control Panel is simple to use; an LCD screen and “at a glance” LEDs display
complete inverter/charger status. Soft keys provide simple access to menus and a rotary encoder
knob allows you to scroll through and select a wide range of settings such as Inverter ON/OFF,
Charger ON/OFF, Shore Power Breaker Setting, AGS Control, Meter Button, Setup and Tech
menus.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network version) is designed to automatically
start your generator based on low battery condition or high temperature. The AGS controller
includes an input voltage jumper (for 12, 24 and 48 volt battery banks) and a 4-position DIP (Dual
In-line Package) switch which provides the ability to change the relay timing configurations to
allow compatibility with a wider range of generators. Adjustable settings when using the ME-ARC
include starting the generator based on Battery Voltage, Time Of Day, Battery ‘State of Charge’
or High Temperature.
Battery Monitor Kit
The ME-BMK-NS Battery Monitor Kit is a single battery bank amp-hour meter that monitors the
condition of the battery and provides information to let you know how much energy you have
available and let you plan your electrical usage to ensure the battery is not being over-discharged.
The -NS version does not include a DC shunt, order ME-BMK to receive a 500A/50mv DC shunt.
Fuse Block/Fuses
The TFB Series of Magnum Fuse/Fuse-blocks are used to protect the battery bank, inverter, and
cables from damage caused by DC short circuits and overloads. They include a slow-blow, high
current Class-T fuse with mounting block and protective cover. The fuse sizes are available in 125,
200, 300 and 400 amps.
© 2009 Magnum Energy Inc.
Page 51