itsce-604050012 - SACESales.com

SACE Isomax S
current-limiting
circuit-breakers
GSIS9091
The switch-disconnectors are derived from
the corresponding circuit-breakers, keeping
the overall dimensions, versions and
accessories unchanged. They guarantee
operation and isolation in maximum safety
and their release device can be activated
either by the undervoltage release or by
the shunt opening release. They can also
be fitted with residual current releases,
thereby constructing “pure” residualcurrent
circuit-breakers.
SACE Isomax S
switch-disconnectors
1
SACE Isomax S
Power distribution
GSIS9075
SACE Isomax S
for applications
up to 1000V
board the circuit-breaker which are normally
carried out by other devices,
thereby ensuring numerous installation
and service advantages.
GSIS9093
SACE Isomax S
according to UL/CSA
Standards
Thanks to a specific range of SACE Isomax S circuit-breakers complying
with the UL489 and CSA22.2 Standards, there are also greater possibilities
for those customers operating on markets subject to the specifications
defined in the North American standards. The range consists of
seven sizes with rated uninterrupted current from 100A to 2500A and
breaking capacities, at 480 V AC, which can reach 100kA.
Within the basic series, there are circuit-breakers with magnetic only
releases (MCP - Motor Control Protection) for motor protection, and
switches (Moulded-Case Switch - MCS) for use as isolators or switching
devices for lines, busbars or plant parts.
SACE Isomax S
for motor protection
classical and advanced
ABB SACE
1/5