Service Manual
Service Manual
Service Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
il<br />
0<br />
\A.<br />
q. rl<br />
€<br />
DisLtibutor, general<br />
Com puterized i g n iti on systems<br />
Checking microswilch on B 23F-LH 1983-1984;<br />
B 230 F-LH 1385-<br />
M8<br />
With engine ofl, turn throttle puLley slowy and isten to<br />
mlcroswitch. A cick should be heard when throltle valve<br />
Adjusting microswitch<br />
M9<br />
Unscrew relaining screws.<br />
Turn switch clockwise slightly. Then turn swilch back<br />
until it contacts slop, but no funher as throttle valve wi<br />
Tighten retaining screws.<br />
M10<br />
Check lhat basic signition setting is 12oa2'at<br />
12.5 r/s (750 r/min)<br />
Air condiioning disconnected as applicabLe.<br />
Adlust ignilon selling by turning dstributor.<br />
Increase engine speed to 2000 rpm for 5 seconds.<br />
Lel the englne idle and check idle quality.<br />
Make sure the dle is slable and wthin specifications as<br />
variations coud afiect the liming.<br />
Check centrilugal advance<br />
Dsconnect vacuum hose lrom distributor.<br />
M11<br />
Run engine at 42 r/s (2 500 r/rnin) and check that ignition<br />
advance is l6-24c belore T D.C. ior B 23 F, B 230 F and<br />
22-30o before T.D C. tor other models.<br />
ll incorrect, replace conlrol unit<br />
65