sliding patio door - Truth Hardware

More documents

Recommendations

Info

HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS TWO-POINT MORTISE LOCK Multi-locking points are becoming the norm for patio doors. Savvy homeowners are now demanding the added security and increased performance that multi-point locking provides. Truth’s new two-point mortise lock is ideally suited for any Truth mortise type handle. We’ve added several versions of this lock, so there is sure to be one that fits your needs. An added feature of Truth’s new two-point lock is an “anti-slam” feature which assures that the lock hooks can’t be damaged by accidentally closing the door with them extended. • Two opposing locking hooks extended into a keeper mounted on the frame make it virtually impossible for the door to be lifted out of the track. • Mortise lock meets AAMA standards for sliding patio doors. • Lock has an “anti-slam” feature which assures that door is shut before the lock can be actuated. This prevents potential damage to the locking bolts by not allowing the bolts to be extended unless the door is closed against the frame. Anti-slam feature is achieved with a button that must be depressed against the frame for the lock to be actuated. • Adjustability in the amount of hook extension is achieved by simply adjusting a set screw in the matching keeper. • Mortise lock is available in three different face plate configurations to fit most wood, vinyl and aluminum patio door designs. MATERIAL & FINISHES: Keepers and face plates are made of plated steel with yellow dichromate unless otherwise noted. Pocket adaptor is made from plated zinc with yellow dichromate. The mortise lock features a heat treated steel bolt for maximum strength. A corrosion resistant version featuring a stainless steel case is also available – see tables within drawings for specific item numbers. WARRANTY: Protected under the terms of the Truth Warranty for Window and Door Manufacturers and Authorized Distributors. Refer to Truth’s Terms & Conditions for further details. ORDERING INFORMATION: Because of the variety of sliding patio door designs on the market, Truth Hardware suggests that you contact one of Truth’s Technical Managers to help you identify the components that will best meet your requirements. These components can include offset locks and recessed adapters. To assist us in helping you identify the product that you need, please be prepared to provide Truth with the type and style of profile that you are mounting the hardware to. #32608 – Standard two-point mortise lock with center drive #32609 – Standard two-point mortise lock with offset drive #32610 – Lock with long faceplate center drive #32611 – Lock with long faceplate offset drive #32612 – Lock with recessed adapter center drive #32613 – Lock with recessed adapter offset drive #32614 – Keeper Stainless steel options are also available – please refer to drawings for specific item numbers TRUTH TIPS: 1. A Truth Hardware Secondary Patio Door Lock or Limiter can be added for applications requiring additional security 2. Bumper guards (Truth item number 22082.XX), to keep door sash from contacting the opposite jamb during its travel are highly recommended (see Handle set accessories section). 3. If hardware shown cannot be fitted to the door because of door/hardware interference, contact Truth for other available options #32608 Shown 4. Installation of longer screws into the keeper rail will increase security. Screws long enough to reach the rough opening frame are recommended. 5. For easy correction of out of square or racked door installations, the use of Jamb Jack (frame adjusters) are recommended. Frame adjustment can improve both weather seal tightness and door operation over the life of the door. 6. For vinyl applications, mounting screws should pass through two PVC walls or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. 7. A 1/8" Allen Wrench is required for adjustments. Not supplied by Truth Hardware. 13
TWO-POINT MORTISE LOCK T FIG. 1 TWO POINT MORTISE LOCK SHORT FACEPLATE APPLICATION 1.160 [29.5 mm] DRIVE LOCATION A DRIVE LOCATION A .75 [19.0 mm] 8.888 [225.8 mm] 4.444 [112.9 mm] .75 [19.0 mm] DRIVE LOCATION B 9.370 [238.0 mm] 4.675 [118.7 mm] DRIVE LOCATION B .650 [16.5 mm] .949 [24.1 mm] CUT-OUT REQUIRED .491 [12.5 mm] STILE JAMB KEEPER 13a
Page 2 and 3:
patio doorhardware catalog handlese
Page 4 and 5:
ROLLERS FOR PATIODOORS SIDE ADJUST
Page 6 and 7:
SIDE ADJUST TANDEM ROLLERS F FIG.1A
Page 8 and 9:
SIDE ADJUST TANDEM ROLLERS FIG.338.
Page 10 and 11:
ROLLERS FOR PATIO DOORS END ADJUST
Page 12 and 13:
END ADJUST TANDEM ROLLERS FIG. 1 19
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
END ADJUST TANDEM ROLLERS FIG. F 8
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
END ADJUST TANDEM ROLLERS FIG. 22 S
Page 32 and 33:
ROLLERS FOR PATIO DOORS 1910 SINGLE
Page 34 and 35:
ROLLERS FOR SCREENDOORS sCREEN ROLL
Page 36 and 37:
sCREEN ROLLERs FIG.3500SERIES F COR
Page 38 and 39:
sCREEN ROLLERs FIG.64518-1000 SCREE
Page 40 and 41:
HANDLES & LOCKSETS MORTISE LOCK APP
Page 42 and 43:
SIGNATURE SERIES PATIO DOOR HANDLE
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
HANDLES & LOCKSETS MORTISE LOCK APP
Page 54 and 55:
ALLURE SERIES PATIO DOOR HANDLE SET
Page 56 and 57: ALLURE SERIES PATIO DOOR HANDLE SET
Page 58 and 59: HANDLES & LOCKSETS MORTISE LOCK APP
Page 62 and 63: 2995 PATIO DOOR HANDLE SETS FIG. 2
Page 66 and 67: 2939/2940/2949 OUTSIDE PULLS 10b FI
Page 70 and 71: 2300/2320 MORTISE LOCKS AND HANDLES
Page 74 and 75: P 2300/2320 MORTISE LOCKS AND HANDL
Page 80 and 81: NEXUS TWO-POINT MORTISE LOCK FIG. 2
Page 90 and 91: NEXUS THREE-POINT MORTISE LOCK FIG.
Page 108 and 109: TWO-POINT MORTISE LOCK FIG. 2 32608
Page 114 and 115: MISCELLANEOUS PATIO DOOR HARDWARE 4
Page 116 and 117: 41 SECONDARY PATIO DOOR LIMITER FIG
Page 118 and 119: MISCELLANEOUS HARDWARE 45 JAMB JACK
Page 120 and 121: 45 JAMB JACKS 15b ADJUSTMENT OF JAM
Page 122 and 123: .728 (18.5mm) 45 JAMB JACKS 15d JAM
Page 124 and 125: SWING PATIO DOORS SENTRY MULTI-POIN
Page 126 and 127: SENTRY MULTI-POINT HINGED PATIO DOO
Page 157 and 158:
SENTRY MULTI-POINT HINGED PATIO DOO
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
SENTRY ADJUSTABLE HINGES FIG. 1 SEN
Page 201 and 202:
SENTRY ADJUSTABLE HINGES FIG. 3 SEN
Page 203 and 204:
SENTRY ADJUSTABLE HINGES 18e 700 WE
Page 205 and 206:
SWING PATIO DOORS 15 SENTRY® MULTI
Page 207 and 208:
SENTRY® MULTI-POINT LOCKING HARDWA
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
show all

sliding patio door - Truth Hardware

Create successful ePaper yourself

Delete template?

Save as template?