sliding patio door - Truth Hardware

More documents

Recommendations

Info

HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2995 PATIO DOOR HANDLE SETS • The #2995 series handle set is one of the industry’s most popular handle sets. These non-handed interior and exterior handle sets are for use on aluminum, vinyl, or wood framed patio doors. • The #2995 series works well with industry standard single point mortisetype locks. • The #2995 series outside handle is available with or without lock cylinder. • #2995 series inside handles may also be combined with Truth’s standard outside pulls for differentiated appearance and price points. • Industry compatible mounting hole pattern makes the #2995 interchangeable with all popular handle sets for OEM and retrofit. • Optional lever handle locations are available based on position of mortise lock within sash. • Extended bosses on the #2995 series inside and outside bases prevent slippage and creep. • Different lever lengths and fasteners are available to accommodate various door widths (stile thickness). • The unique design of the #2995 Series Handle Sets provides for extra security - as no screws are accessible from the outside. MATERIAL & FINISHES: Available in either solid brass or painted zinc die cast. Paint finishes are electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining color stability for years in direct sunlight. Please refer to Truth’s Color Chart for examples of Truth’s most popular finish options. Truth also offers this product in a decorative plated brass finish - contact Truth for additional information on availability of optional plated finishes. These handle pulls and escutcheon parts are interchangeable amongst finish options to achieve the desired aesthetic appearance. WARRANTy: Protected under the terms of the Truth Warranty for Window and Door Manufactures and Authorized Distributors. Refer to Truth’s Terms & Conditions for further details. ORDERING INFORMATION: To customize the hardware package* containing the specific items you require for your door system, please select from the following options: 1. Order non-handed 2995 Series Inside Handle Set (which includes #32419.XX Inside Pull, #32390.XX Inside Escutcheon, and #32362.XX Lever). 2. Select 2995 Series Outside Handle Set with or without lock cylinder (for other available options - see table in Fig. 2 or Outside Pull catalog section) 3. Select Mortise Lock and Keeper item numbers (see table in Fig. 1 or Mortise Lock & Keeper Section for further details). 4. Specify finish. 5. Specify fasteners. Note: Please specify door panel thickness to determine screw length required. Optional Hardware (sold separately) • Key Lock Cylinder • Specify thickness of door. • Specify keyed-alike, keyed different, or master-key option. Special Ordering Notes: • Assembly mounts with two #8 machine screws through the stile and into the tapped holes in the exterior pull. • When used with an exterior key lock cylinder, consult key lock cylinder blade length table in Fig. 5 of Handleset Accessories section. Stock drive blade lengths are: .530", .660", .750", .810", 1.200" and 1.300". * Contact your Truth Representative after you have made the above selections so that a customized “kit” package can be created to simplify your ordering. TRUTH TIPS: 1. A Truth Hardware Secondary Patio Door Lock or Limiter can be added for applications requiring additional security. 2. Bumper guards (Truth item number 22082.XX), to keep door sash from contacting the opposite jamb during its travel, are highly recommended (see Handleset Accessories section). 3. The use of frame adjusters (Jamb Jacks) is recommended for easy correction of out of square or racked door installations. Frame adjustment can improve both weather seal tightness and door operation over the 8
2995 PATIO DOOR HANDLE SETS FIG. 1 2995 SERIES INSIDE PULL ALTERNATE LEVER LOCATIONS 1.724 [43.8 mm] 32362.XX .750 [19.0 mm] 32419.XX 8.470 [215.1 mm] 3.937 [100.0 mm] 6.542 [166.2 mm] .750 [19.0 mm] 32390.XX 2X ø .295 [7.5 mm] LEVER CAN BE OFFSET .175" (4.4mm) IN EITHER DIRECTION HORIZONTALLY .090 [2.3 mm] .285 [7.2 mm] .491 [12.5 mm] .982 [24.9 mm] 1.685 [42.8 mm] 1.285 [32.6 mm] AVAILABLE OUTSIDE PULLS DESCRIPTION PART NO. 2995 W/O CYL 32419.XX/32325.XX 2995 W CYL 32419.XX/32462.XX "X" (SEE NOTE 2) .246 (6.2mm) SEE NOTE 1 HARDWARE SHOWN *2949 W/O CYL *2949 W CYL 32434.XX 32438.XX *2939 W/O CYL 32442.XX *2939 W CYL 32479.XX .621 (15.8mm) INSIDE PULL INSIDE ESCUTCHEON LEVER 32419.XX 32390.XX 32362.XX .XX INDICATES FINISH *SEE OUTSIDE PULL CATALOG SECTION FOR DETAILS NOTES: 1. BLADE LENGTH = 1/2 DOOR THICKNESS WHEN USED WITH LOCK CYLINDER (WILL VARY; FORMULA BASED ON CENTERED MORTISE LOCK) 2. MOUNTING SCREW LENGTH = DOOR THICKNESS + "X" **AVAILABLE MORTISE LOCKS 32435 32436 32461 32439 **SEE MORTISE LOCK CATALOG SECTION FOR DETAILS 8a
Page 2 and 3:
patio doorhardware catalog handlese
Page 4 and 5:
ROLLERS FOR PATIODOORS SIDE ADJUST
Page 6 and 7:
SIDE ADJUST TANDEM ROLLERS F FIG.1A
Page 8 and 9:
SIDE ADJUST TANDEM ROLLERS FIG.338.
Page 10 and 11: ROLLERS FOR PATIO DOORS END ADJUST
Page 12 and 13: END ADJUST TANDEM ROLLERS FIG. 1 19
Page 18 and 19: END ADJUST TANDEM ROLLERS FIG. F 8
Page 30 and 31: END ADJUST TANDEM ROLLERS FIG. 22 S
Page 32 and 33: ROLLERS FOR PATIO DOORS 1910 SINGLE
Page 34 and 35: ROLLERS FOR SCREENDOORS sCREEN ROLL
Page 36 and 37: sCREEN ROLLERs FIG.3500SERIES F COR
Page 38 and 39: sCREEN ROLLERs FIG.64518-1000 SCREE
Page 40 and 41: HANDLES & LOCKSETS MORTISE LOCK APP
Page 42 and 43: SIGNATURE SERIES PATIO DOOR HANDLE
Page 54 and 55: ALLURE SERIES PATIO DOOR HANDLE SET
Page 56 and 57: ALLURE SERIES PATIO DOOR HANDLE SET
Page 62 and 63: 2995 PATIO DOOR HANDLE SETS FIG. 2
Page 66 and 67: 2939/2940/2949 OUTSIDE PULLS 10b FI
Page 70 and 71: 2300/2320 MORTISE LOCKS AND HANDLES
Page 74 and 75: P 2300/2320 MORTISE LOCKS AND HANDL
Page 80 and 81: NEXUS TWO-POINT MORTISE LOCK FIG. 2
Page 90 and 91: NEXUS THREE-POINT MORTISE LOCK FIG.
Page 108 and 109: TWO-POINT MORTISE LOCK FIG. 2 32608
Page 110 and 111:
TWO-POINT MORTISE LOCK FIG. 4 32610
Page 112 and 113:
TWO-POINT MORTISE LOCK FIG. 6 32612
Page 114 and 115:
MISCELLANEOUS PATIO DOOR HARDWARE 4
Page 116 and 117:
41 SECONDARY PATIO DOOR LIMITER FIG
Page 118 and 119:
MISCELLANEOUS HARDWARE 45 JAMB JACK
Page 120 and 121:
45 JAMB JACKS 15b ADJUSTMENT OF JAM
Page 122 and 123:
.728 (18.5mm) 45 JAMB JACKS 15d JAM
Page 124 and 125:
SWING PATIO DOORS SENTRY MULTI-POIN
Page 126 and 127:
SENTRY MULTI-POINT HINGED PATIO DOO
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
SENTRY ADJUSTABLE HINGES FIG. 1 SEN
Page 201 and 202:
SENTRY ADJUSTABLE HINGES FIG. 3 SEN
Page 203 and 204:
SENTRY ADJUSTABLE HINGES 18e 700 WE
Page 205 and 206:
SWING PATIO DOORS 15 SENTRY® MULTI
Page 207 and 208:
SENTRY® MULTI-POINT LOCKING HARDWA
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
show all

sliding patio door - Truth Hardware

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?