sliding patio door - Truth Hardware

More documents

Recommendations

Info

HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS NEXUS LOCK SYSTEMS The NexusLock System from Truth Hardware is the latest in two-point and multi-point lockset options for sliding patio doors. Designed to be compatible with all industry standard handle sets, the Nexus Locking Systems have a number of standard features that have been proven by our customers to set Truth apart from the competition. NEXUS TWO-POINT SYSTEM Combining both versatility and easy installation, the Nexus System is suitable for either wood or vinyl door applications, and is available in three unique mounting configurations; Flush Mount, Face Mount (16mm or 20mm Euro groove), or Recessed. The Nexus 2 Point Lock is available in either stainless steel or carbon steel. The Nexus Two-Point Lock System utilizes two opposing locking points (hooks) that offers an intuitive single point of horizontal adjustment for the reach of the lock hooks. NEXUS MULTI-POINT LOCK SYSTEM The Nexus Multi-Point Lock System which is offered in stainless steel as a standard has three individually adjustable locking points with opposing upper and lower lock points to prevent the door from being lifted which further enhances its security. A greater adjustment range at the remote hooks provides the additional forgiveness needed on doors which may be out-ofsquare due to poor installation. options for the lock, standard and extended reach, which each have a horizontal adjustment feature built into them to offer additional forgiveness. INDUSTRY TESTED: The Nexus Lock Systems have been built to help customers meet the AAMA and CAWM forced entry requirements. The Nexus Two-Point System can exceed 2,800 lbs. of pulling force and the Multi-Point System exceeds 3,000 lbs. KEEPERS: Truth realizes that no two door systems are exactly alike; therefore we have designed multiple keeper options to accommodate your application. In addition, a special “keeper locator” makes the installation of the keeper virtually fool proof. Face - Mount MATERIAL & FINISHES: Standard features for the Nexus family of lock systems includes: ANTI-SLAM FEATURE: Truth’s “anti-slam” feature prevents potential damage to the door or locking system hooks by not allowing the hooks to be extended unless the door is closed against the frame. This feature ensures that when the lock is operated it is close enough to properly engage the keeper avoiding a “false” sense of lock up. STANDARD & EXTENDED REACH: The Nexus Locking System has two WARRANTY: Protected under the terms of the Truth Warranty for Window and Door Manufacturers and Authorized Distributors. Refer to Truth’s Terms and Conditions for further details. ORDERING INFORMATION: Because of the variety of sliding patio door designs on the market, Truth Hardware suggests that you contact Truth’s Technical Service Department to help you identify the components that will best meet your requirements. To assist us in helping you identify the product that you need, please be prepared to provide Truth with the type and style of profile that you are mounting your hardware to. TRUTH TIPS: 1. A Truth Hardware Secondary Patio Door Lock or Limiter can be added for applications requiring additional security. 2. Bumper guards (Truth item number 22082.XX), to keep door sash from contacting the opposite jamb during its travel, are highly recommended (see Handleset Accessories section). 3. If hardware shown cannot be fitted to the door because of door/hardware Recessed - Mount Multi - Point interference, contact Truth for other available options. 4. Installation of longer screws into the keeper rail will increase security. Screws long enough to reach the rough opening frame are recommended. 5. For easy correction of out of square or racked door installations, the use of Jamb Jack (frame adjusters) are recommended. Frame adjustment can improve both weather seal tightness and door operation over the life of the door. 6. For vinyl applications, mounting screws should pass through two PVC walls or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. 12
NEXUS TWO-POINT MORTISE LOCK FIG. 1 TWO POINT MORTISE, SHORT FACEPLATE APPLICATION LOCK MOUNTING TAB LOCK FACEPLATE LOCK APPLICATION 1.38 [35.0 mm] 2X HOLE FOR #6 SCREW 2X R HOLE POSITION AND DIAMETER DETERMINED BY HANDLE CHOICE 7.87 [200.0 mm] 7.38 [187.3 mm] 2.56 [65.0 mm] 3.94 [100.1 mm] Ø.31 [8.0 mm] 12a .64 [16.3 mm] CUT-OUT REQUIRED
Page 2 and 3:
patio doorhardware catalog handlese
Page 4 and 5:
ROLLERS FOR PATIODOORS SIDE ADJUST
Page 6 and 7:
SIDE ADJUST TANDEM ROLLERS F FIG.1A
Page 8 and 9:
SIDE ADJUST TANDEM ROLLERS FIG.338.
Page 10 and 11:
ROLLERS FOR PATIO DOORS END ADJUST
Page 12 and 13:
END ADJUST TANDEM ROLLERS FIG. 1 19
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
END ADJUST TANDEM ROLLERS FIG. F 8
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
END ADJUST TANDEM ROLLERS FIG. F 18
Page 28 and 29: END ADJUST TANDEM ROLLERS FIG. F 20
Page 30 and 31: END ADJUST TANDEM ROLLERS FIG. 22 S
Page 32 and 33: ROLLERS FOR PATIO DOORS 1910 SINGLE
Page 34 and 35: ROLLERS FOR SCREENDOORS sCREEN ROLL
Page 36 and 37: sCREEN ROLLERs FIG.3500SERIES F COR
Page 38 and 39: sCREEN ROLLERs FIG.64518-1000 SCREE
Page 40 and 41: HANDLES & LOCKSETS MORTISE LOCK APP
Page 42 and 43: SIGNATURE SERIES PATIO DOOR HANDLE
Page 54 and 55: ALLURE SERIES PATIO DOOR HANDLE SET
Page 56 and 57: ALLURE SERIES PATIO DOOR HANDLE SET
Page 62 and 63: 2995 PATIO DOOR HANDLE SETS FIG. 2
Page 66 and 67: 2939/2940/2949 OUTSIDE PULLS 10b FI
Page 70 and 71: 2300/2320 MORTISE LOCKS AND HANDLES
Page 74 and 75: P 2300/2320 MORTISE LOCKS AND HANDL
Page 80 and 81: NEXUS TWO-POINT MORTISE LOCK FIG. 2
Page 90 and 91: NEXUS THREE-POINT MORTISE LOCK FIG.
Page 108 and 109: TWO-POINT MORTISE LOCK FIG. 2 32608
Page 114 and 115: MISCELLANEOUS PATIO DOOR HARDWARE 4
Page 116 and 117: 41 SECONDARY PATIO DOOR LIMITER FIG
Page 118 and 119: MISCELLANEOUS HARDWARE 45 JAMB JACK
Page 120 and 121: 45 JAMB JACKS 15b ADJUSTMENT OF JAM
Page 122 and 123: .728 (18.5mm) 45 JAMB JACKS 15d JAM
Page 124 and 125: SWING PATIO DOORS SENTRY MULTI-POIN
Page 126 and 127: SENTRY MULTI-POINT HINGED PATIO DOO
Page 128 and 129:
SENTRY MULTI-POINT HINGED PATIO DOO
Page 130 and 131:
Page 132 and 133:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
SENTRY ADJUSTABLE HINGES FIG. 1 SEN
Page 201 and 202:
SENTRY ADJUSTABLE HINGES FIG. 3 SEN
Page 203 and 204:
SENTRY ADJUSTABLE HINGES 18e 700 WE
Page 205 and 206:
SWING PATIO DOORS 15 SENTRY® MULTI
Page 207 and 208:
SENTRY® MULTI-POINT LOCKING HARDWA
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
show all

sliding patio door - Truth Hardware

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?