download - Ilme
download - Ilme
download - Ilme
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
i<br />
crimping tools<br />
for connectors inserts<br />
drawing ILME description packaging<br />
part No.<br />
crimping tools and accessories for 10A and 16A<br />
manual crimping tool AF8<br />
CCPZ MIL crimping is performed with 8 pressure points, 0<br />
with locking device preventing from opening until complete crimping of contacts<br />
in compliance with MIL-C-22520/1 (part number M22520/1-01)<br />
N.B.: it must be equipped with the turret heads CCTP 10 and/or CCTP 16<br />
pneumatic crimping tool WA27F DANIELS<br />
CCPZP crimping is performed with 8 pressure points, 1<br />
with locking device preventing from opening until complete crimping of contacts<br />
N.B.: it must be equipped with the turret heads CCTP 10 and/or CCTP 16, optionally<br />
with the pneumatic control device (i.e. CCVPP) and support (CCSPZP)<br />
ACCESSORIES<br />
support for pneumatic crimping tool<br />
CCSPZP in steel with fixing plate and blocking device allowing to secure the tool at any angle 1<br />
for individual comfort<br />
pneumatic foot valve for pneumatic crimping tool<br />
CCVPP for the control of the crimping operation 1<br />
turret heads for CCPZ MIL and CCPZP tools<br />
CCTP 10 for male and female contacs 10A (inserts type CD-CDD-MIXO-CX) 1<br />
suitable for crimping wire section 0,14 ÷ 2,5 mm 2<br />
CCTP 16 for male and female contacts 16A (inserts type CCE-CDC-CMC-MIXO-CQ-CQE-CX) 1<br />
suitable for crimping wire section 0,14 ÷ 4 mm 2<br />
pneumatic automatic crimpping tool WA27FAP DANIELS<br />
CCPZPA crimping is performed with 8 pressure points, with positioner and automatic device 1<br />
for the crimping complete cycle providedwith support<br />
N.B.: it must be equipped with the positioner inserts (CCTPADM and CCTPADF)<br />
to be ordered according to the type of contacts to be crimped<br />
positioner inserts for CCPZPA tool<br />
for male and female contacts 10A (inserts type CD-CDD-MIXO-CX)<br />
CCTPADM male contacts, for wire section 0,14 ÷ 2,5 mm 2 1<br />
CCTPADF female contacts, for wire section 0,14 ÷ 2,5 mm 2 1<br />
for male and female contacts 16A (inserts type CCE-CDC-CMC-MIXO-CQ-CQE-CX)<br />
CCTPACM male contacts, for wire section 0,5 ÷ 4 mm 2 1<br />
CCTPACF female contacts, for wire section da 0,5 ÷ 4 mm 2 1<br />
gauge and tools<br />
control gauge for CCPZ MIL, CCPZP and CCPZPA<br />
CCPNP go/no go in order to check the tool is working according to specifications 1<br />
in compliance with MIL-C-22520/3 MIL-C-22520/3<br />
insertion tool<br />
CCINA for insertion of the contacts into the inserts for crimped contacts up to 0,75 mm 2 10<br />
removal tools for contacts<br />
CCES for the extraction of contacts 10A from the inserts (extraction from the front) 1<br />
CCPR RN replacement tip for CCES removal tool 1<br />
CQES for the extraction of contacts 16A from the inserts (extraction from the back) 1<br />
For technical data-sheet and further information please look at our technical catalogues on website www.ilme.com<br />
58