A230E-Handheld - Camille Bauer AG

14
No. Topmost display Undermost display Meaning Hints
9
10
11
12
13
resp.
Alarm supervision source
(continuation)
I neutral (Neutral current)
S interval (Apparent power
interval)
Q interval (Reactive power interval)
(ind./inc. to Q-defi nition 7 )
P interval (Active power interval)
incoming (incoming)
Power factor (cos-phi)
Apparent power
Reactive power
Active power
Voltage
U Line-Neutral (Phase voltage)
U Line-Line (Line to line voltage)
I Average (Phase current bimetal)
Phase current
‘1L‘
‘3Lb‘
‘4Lb‘
Line type
‘3Lu‘
‘3Lu.A‘
‘4Lu‘
‘4Lu.0‘
: ‘A.on‘ = OR-operation of line-measurands
‘A.off‘ = AND-operation of line-measurands
/ Alarm unit for ON-state The maximum values of the alarm limits depend
on the possible measuring range (fi xed by hardware),
converted into possible primary values
/ Alarm unit for OFF-state
given by the selected systemconfi guration and
transformation ratios..
/
/
resp.
resp.
resp.
resp.
Switch-in and Dropout delay of the
alarm
Source of energy meters for pulse
output
Reactive energy capacitive /
outgoing low tariff
Reactive energy capacitive /
outgoing high tariff
Reactive energy inductive /
incoming low tariff
Reactive energy inductive /
incoming high tariff
Range: 0.3 … 999.9 s
(Reactive energy acc. to Q defi nition 7 )
(capacitive low tariff)
(outgoing low tariff)
(capacitive high tariff)
(outgoing high tariff)
(inductive low tariff)
(incoming low tariff)
(inductive high tariff)
(incoming high tariff)
Active energy outgoing low tariff (outgoing low tariff)
Active energy outgoing high tariff (outgoing high tariff)
Active energy incoming low tariff (incoming low tariff)
Active energy incoming high tariff (incoming high tariff)