Wire Cable Management - Doug Mockett and Co.

End view shows profile of Support Bracket,
how it screws to wall on right and to desk from
underneath. Wires push through optional brush
and extrusion, then through holes to plug.
SB6 & SBXB6
- Support Bracket
Designed by: Timothy Ryan
- Poughkeepsie, NY.
Walls are crooked. Your work surface is
straight. Putting the work surface up
against the wall creates a problem: The
installer must scribe the work surface
to the wall, trim and fit, trim and fit,
until it’s right. Tim Ryan’s 1995 Design
Contest Winner does two things: First,
it supports the work surface away from
the wall so no need to scribe. Second,
he designed in a wire management
trough so wires can pass behind the
desk and plug in underneath.
And we offer another feature as an
option: A piece of extrusion holding a
brush running the length of the bracket
so the unit appears more integrated to
the work surface, and the trough is
concealed.
Sold in 6 foot lengths.
Finishes: Black, Satin Aluminum.
Optional extrusion/brush: extrusion
Black or Light Grey, brush Black
only.
WIRE MANAGEMENT
SBXB6
1/8"
MOUNT TO
SB6
COUNTER TOP
1" 1/4"
1. SPACE FROM THE WALL
1-7/8"
TO THE COUNTER IS 1-7/8"
1-1/2" 2. SPACE BETWEEN
COUNTER TOP
AND SB6 IS 1/8"
SB Black Satin Aluminum Grey
Bracket SB6-90 SB6-94 -
Brush &
Extrusion
SBXB6-90 - SBXB6-92
www.mockett.com 800.523.1269
97