Wire Cable Management - Doug Mockett and Co.

Wire & Cable Management
Clipper Gripper
Designed by: Steve Goldberg -
Philadelphia, PA.
What a great idea! This liner’s got a clip
on the inner wall. When you are trying
to push a cord up from under a desk
and at the same time trying to reach
over the top and hold the cord so it
won’t fall back through the hole and
onto the floor and you have to start
over again. Just clip the cord onto the
“Clipper Gripper”, casually reach in and
pull it through. EZ! Plus, the “Clipper
Gripper” keeps wires handy, just within
reach. Available in standard colors.
Not available in plated finishes.
EDPAD1-92
Light Grey
EDPCG1-91
Walnut Brown
EDPCG1-90
Matte Black
Adjustable Depth
Liner
Designed by: Scott Hofmann -
Seattle, WA.
Grooves placed at standard work surface
depths, so all you do is cut off
liner to match depth, 3 /8" to 1 3 /4".
Available in five standard colors.
Available to fit EDP and SG Series
1 3 /4" hole size. See page 59 for
specs.
Air Vent Cap
Designed by: Hugh White -
Sarasota, FL.
When you need to vent hot air from
credenzas or computer cabinets, this
cap fits over EDP liner. Also available
in ZG Series size. See page 59 for
specifications and colors.
EDPAVG2 -90
Matte Black
EDPW2-95
White
No Slot Cap
To completely cover liner and use later,
use No Slot Cap. Available in 10
standard colors opposite (no plated
finishes) and in following Series: AG,
OG, BG, SG, EDP and XG.
See page 59 for specifications.
www.mockett.com 60
800.523.1269