Wire Cable Management - Doug Mockett and Co.

How to Order
Ordering our round plastic grommets is as easy as 1, 2, 3 … see below.
Figure hole size required and
Specify color or finish:
1
order that part number:
Liner Hole Size to Drill Part Number
Color/Finish
Code
Black 90
3/4" AG
Walnut Brown 91
1" OG
Putty 93
1 1 /2" BG
Light Grey 92
1 3 /4" SG
White 95
2
2A
2" TG
2 1 /8" SP
2 1 /2" EDP
3" XG
3 1 /2" YG
4" ZG
Order either grommet liner, cap,
or the set of both, as follows:
Using our SG Series for an example,
here’s what to do:
Order part number SG3 if you want the
complete set of cap and liner; specify color.
Order part number SG1 if you just want the
grommet liner but no cap; specify color.
Order part number SG2 if you just want the
grommet cap but no liner; specify color.
Order part number SG5 if you want a plated set;
specify finish.
Note SG5 plated comes only as a set, no separate
liners or caps available.
4
5
Navy Grey
Desert Sand
Mahogany
Warm Grey
Pecan
92N
93D
91M
92W
93P
Antique Bronze 11
Polished Brass 3
Polished Chrome 26
Satin Chrome
26D
Figure quantity desired, see price
list on page 283 for price and quantity
discount that applies.
6 Place order! Call us at 800-523-1269,
email to info@mockett.com or fax to
800-235-7743, see order form on
page 299. Most every grommet in
every color is always in stock and
almost always goes out to you the
same day you order.
PLASTIC
3
Should you wish an optional cap
or liner, please specify:
No slot cap.
Available to fit AG, OG, BG, SG, EDP, XG liners.
See page 60.
Air Vent Grille Cap to fit EDP or ZG liners.
See page 60.
Adjustable Depth liner to fit SG or EDP sizes.
See page 60.
Clipper Gripper liner to fit EDP cap.
See page 60.
www.mockett.com 61
800.523.1269