Wire Cable Management - Doug Mockett and Co.

Furniture Legs & Casters
TLW - Series
Designed by: Peter Stathis -
San Francisco, CA.
Peter’s been noodling on how to best
incorporate wire management into our
line of table legs for quite some time
now. He has triumphantly come up
with several viable solutions to handle
the wires. One leg incorporates a
1 1 /2" hole in the top plate of the leg.
The plugs and cords can go through
your desktop via one of our fine
grommets placed directly above the
center of the leg. The wires will go
through the leg to the bottom and exit
via a mousehole. Good-bye wires,
good-bye problems. Hello, fine solution.
Or, the wires can enter this leg
from a 1 1 /2" diameter hole at the top
of the tube, then drop down to the
mousehole exit.
Comes 4" or 6" diameter by 27",
28 1 /2" high and 34 1 /2" or any
other height available. Plate leveler
available. Made to order; call for pricing.
Finishes: Polished Chrome, Satin
Chrome, Matte Black, Custom
finishes available.
Weight capacity: 300 lbs. per leg.
TOP PLATE (KD)
1-1/2"
DIA.
TLW (A) (B) (C)
TL27W
TL28W
TL34W
TL27W-490
Matte Black
27" 4" 10" SQ.
27" 6" 12" SQ.
28 1 /2" 4" 10" SQ.
28 1 /2" 6" 12" SQ.
34 1 /2" 4" 10" SQ.
34 1 /2" 6" 12" SQ.
TLRUL - Series, Rubber Leg
That’s right a Rubber Leg! This
contemporary design steel leg has a
taut seamless rubber cover instead of
a plated or painted finish. The look is
elegant. The overall effect is amazing.
When you want something different,
try the Rubber Leg: it’s the ultimate
contemporary expression.
One size only, 27" tall by 3 1 /4"
diameter.
Finish: Matte Black.
Weight capacity: 150 lbs. per leg.
LIMITED TO STOCK
ON HAND
TOP PLATE (KD)
(C)
(A)
5/16"
(C)
(B)
DIA.
5/8"
DIA.
1-1/2"
DIA.
(A)
GLIDE LEVELER
ADJUST 1"
(B)
DIA.
6-7/8" O.C.
3-1/4" DIA.
7/16"
27"
TL27W
TL28W
(A) (B) (C)
27"
27"
4"
6"
10"SQ.
12"SQ.
28-1/2" 4" 10"SQ.
28-1/2" 6" 12"SQ.
TLRUL-90
Matte Black
PLASTIC LEVELER
1" ADJUSTMENT
www.mockett.com TL34W 34-1/2" 4" 10"SQ.
194
800.523.1269
34-1/2" 6" 12"SQ.