Synthesised Radio Modem X8200 X8200HP - RF Solutions

More documents

Recommendations

Info

Synthesised Radio Modem X8200 X8200HP If a parity bit is required use the horizontal arrow key to select Y The parity bit is only used between the host and the radio modem Odd or Even Parity O/E RF Power If parity is required either O for Odd or E for Even parity can be set by pressing the horizontal arrow keys. The RF output power can set using a number between 1 minimum and 5 maximum. The horizontal arrow keys are used to change the value. RF Channel The Radio Frequency can be set by using a number between 1 and 17. If channel 0 is selected the radio will use the DIL switch settings to select the RF frequency RF DIL SWITCH (Used when RF Ch is set to 0) Channel Frequency SW5 SW4 SW3 SW2 SW1 1 458.525 ON ON ON ON OFF 2 458.550 ON ON ON OFF ON 3 458.575 ON ON ON OFF OFF 4 458.600 ON ON OFF ON ON 5 458.625 ON ON OFF ON OFF 6 458.650 ON ON OFF OFF ON 7 458.675 ON ON OFF OFF OFF 8 458.700 ON OFF ON ON ON 9 458.725 ON OFF ON ON OFF 10 458.750 ON OFF ON OFF ON 11 458.775 ON OFF ON OFF OFF 12 458.800 ON OFF OFF ON ON 13 458.825 ON OFF OFF ON OFF 14 458.850 ON OFF OFF OFF ON 15 458.875 ON OFF OFF OFF OFF 16 458.900 OFF ON ON ON ON 17 458.925 OFF ON ON ON OFF In addition an ATX instruction can be used to change the RF frequency form the serial port. For example to change the RF frequency to channel 09 the instruction would be: A T X 0 9 41 54 58 30 39 Were the channel number is sent as two ASCII number characters 30-39 for 0-9 DS8200-2 April ’07 ©2007 RF Solutions Ltd, www.rfsolutions.co.uk Page 10
Synthesised Radio Modem X8200 X8200HP DS8200-2 April ’07 ©2007 RF Solutions Ltd, www.rfsolutions.co.uk Page 11
Page 1 and 2: Synthesised Radio Modem X8200 X8200
Page 9: Synthesised Radio Modem X8200 X8200
Page 19: Synthesised Radio Modem X8200 X8200

Synthesised Radio Modem X8200 X8200HP - RF Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?