user manual - Utax

More documents

Recommendations

Info

Preparation before Use Connecting Cables Follow the steps below to connect cables to the machine. Off 1 If the machine power is on, press the power key on the operation panel and make sure that the message displayed and memory light are off. Then, press the main power switch to turn off the power. 2 On 2 Connect the machine to the PC or your network device. When using the network interface, remove the cap. 3 Remove the Power Cord Connector Cover. 1 2 2-5
Preparation before Use 4 Connect one end of the supplied power cable to the machine and the other end to a power outlet. IMPORTANT: Only use the power cable that comes with the machine. 5 Replace the Power Cord Connector Cover. Off 6 Turn the main power switch on. The machine begins to warm up. On 7 When connecting the network cable, configure the network. For details, refer to Network Setup (LAN Cable Connection) on page 2-14. 2-6
Page 1: user manual Digital colour Multifun
Page 4 and 5: Safety Conventions in This Guide Th
Page 6 and 7: Contents Print Override . . . . . .
Page 8 and 9: Quick Guide Be sure to read Legal a
Page 10 and 11: Administrator tasks To send a FAX (
Page 12 and 13: Subject Entry (page 5-22) JobFinish
Page 14 and 15: JobFinish Notice (page 5-28) Densit
Page 16 and 17: IPP Security (page 8-161) HTTP Secu
Page 18 and 19: Custom PaperSize Cassette 2 Set. Ca
Page 20 and 21: XPS FitTo Page (page 8-45) Detail S
Page 22 and 23: Edit Destination Address Book Store
Page 24 and 25: Environment The service environment
Page 26 and 27: Other precautions Return the exhaus
Page 28 and 29: Legal Restriction on Copying/Scanni
Page 30 and 31: Legal and Safety Information Please
Page 32 and 33: GPL/LGPL This product contains GPL
Page 34 and 35: Monotype Imaging License Agreement
Page 36 and 37: About this Operation Guide This Ope
Page 38 and 39: Conventions in This Guide The follo
Page 40 and 41: 1 Part Names This chapter identifie
Page 42 and 43: Part Names 1 Clears entered numbers
Page 44 and 45: Part Names 20 Fuser Cover 21 Paper
Page 46 and 47: 2 Preparation before Use This chapt
Page 48 and 49: Preparation before Use Determining
Page 52 and 53: Preparation before Use Power On/Off
Page 54 and 55: Preparation before Use Sleep and Au
Page 56 and 57: Preparation before Use Setting Date
Page 58 and 59: Preparation before Use Date Setting
Page 60 and 61: Preparation before Use System: a b
Page 62 and 63: Preparation before Use Use the proc
Page 64 and 65: Preparation before Use IPv4 Setting
Page 66 and 67: Preparation before Use IMPORTANT: W
Page 68 and 69: Preparation before Use Embedded Web
Page 70 and 71: Preparation before Use 2 Enter the
Page 72 and 73: Preparation before Use Loading Pape
Page 74 and 75: Preparation before Use 6 Insert the
Page 76 and 77: Preparation before Use 3 Adjust the
Page 78 and 79: Preparation before Use 3 Adjust the
Page 80 and 81: Preparation before Use Paper stoppe
Page 82 and 83: Preparation before Use *** To chang
Page 84 and 85: Preparation before Use When the pap
Page 86 and 87: Preparation before Use Cassette 1 T
Page 88 and 89: Preparation before Use MP Tray Size
Page 90 and 91: Preparation before Use Loading Orig
Page 92 and 93: Preparation before Use Installing P
Page 94 and 95: Preparation before Use 4 A window a
Page 96 and 97: Preparation before Use 7 Choose Sel
Page 98 and 99: Preparation before Use Setting TWAI
Page 100 and 101:
Preparation before Use 2 Select the
Page 102 and 103:
3 Basic Operation This chapter expl
Page 104 and 105:
Basic Operation One-Touch Keys and
Page 106 and 107:
Basic Operation Changing and Deleti
Page 108 and 109:
Basic Operation Copying Follow the
Page 110 and 111:
Basic Operation Adjusting Density U
Page 112 and 113:
Basic Operation Selecting Image Qua
Page 114 and 115:
Basic Operation Zoom Copying Adjust
Page 116 and 117:
Basic Operation Standard Zoom: a b
Page 118 and 119:
Basic Operation • Binding Left/Ri
Page 120 and 121:
Basic Operation Scanning... Job No.
Page 122 and 123:
Basic Operation 5 Press the OK key.
Page 124 and 125:
Basic Operation 6 Select the Basic
Page 126 and 127:
Basic Operation Sending This machin
Page 128 and 129:
Basic Operation 4 Enter the destina
Page 130 and 131:
Basic Operation Host Name(SMB): Osa
Page 132 and 133:
Basic Operation Dest. Confirm.: a b
Page 134 and 135:
Basic Operation 2 At the Command Pr
Page 136 and 137:
Basic Operation In Windows XP, righ
Page 138 and 139:
Basic Operation 10 Select the added
Page 140 and 141:
Basic Operation Configuring Windows
Page 142 and 143:
Basic Operation 6 Select TCP, selec
Page 144 and 145:
Basic Operation Confirm Destination
Page 146 and 147:
Basic Operation 4 Press the or ke
Page 148 and 149:
Basic Operation Sending to Differen
Page 150 and 151:
Basic Operation Original Configurat
Page 152 and 153:
Basic Operation Checking Remaining
Page 154 and 155:
4 Copying Functions This chapter ex
Page 156 and 157:
Copying Functions Original Size: a
Page 158 and 159:
Copying Functions 7 Press the OK ke
Page 160 and 161:
Copying Functions 10 Place paper in
Page 162 and 163:
Copying Functions Use the procedure
Page 164 and 165:
Copying Functions Combine Mode This
Page 166 and 167:
Copying Functions Function Menu: a
Page 168 and 169:
Copying Functions Job Finish Notice
Page 170 and 171:
Copying Functions File Name Entry N
Page 172 and 173:
Copying Functions Color Selection S
Page 174 and 175:
Copying Functions 10 Press the or
Page 176 and 177:
Copying Functions Background Densit
Page 178 and 179:
Copying Functions Saturation Adjust
Page 180 and 181:
5 Sending Functions This chapter ex
Page 182 and 183:
Sending Functions Original Size: a
Page 184 and 185:
Sending Functions 1 Press the Send
Page 186 and 187:
Sending Functions Zoom: a b *******
Page 188 and 189:
Sending Functions 6 Press the or
Page 190 and 191:
Sending Functions Orig.Orientation:
Page 192 and 193:
Sending Functions 2 Place the origi
Page 194 and 195:
Sending Functions Original Image Se
Page 196 and 197:
Page 198 and 199:
Sending Functions Color / Grayscale
Page 200 and 201:
Sending Functions File Name Entry T
Page 202 and 203:
Sending Functions Sharpness Adjust
Page 204 and 205:
Page 206 and 207:
Sending Functions Select Computer:
Page 208 and 209:
Sending Functions Address Entry: A
Page 210 and 211:
Sending Functions Scanning Image us
Page 212 and 213:
6 Document Box This chapter explain
Page 214 and 215:
Document Box Select a folder and pr
Page 216 and 217:
Document Box Saving Documents to US
Page 218 and 219:
Document Box Removing USB Memory Re
Page 220 and 221:
Document Box l Fiala: a b *********
Page 222 and 223:
Document Box l Fiala: a b *********
Page 224 and 225:
7 Status / Job Cancel This chapter
Page 226 and 227:
Status / Job Cancel 0009 Detail: C
Page 228 and 229:
Status / Job Cancel When complete j
Page 230 and 231:
Page 232 and 233:
Status / Job Cancel Print Job Log:
Page 234 and 235:
Page 236 and 237:
Status / Job Cancel Sending the Job
Page 238 and 239:
Status / Job Cancel Dest. Confirm.:
Page 240 and 241:
Status / Job Cancel Job Log History
Page 242 and 243:
Status / Job Cancel Device/Communic
Page 244 and 245:
Status / Job Cancel USB memory can
Page 246 and 247:
8 Default Setting (System Menu) Thi
Page 248 and 249:
Default Setting (System Menu) Switc
Page 250 and 251:
Default Setting (System Menu) Defau
Page 252 and 253:
Default Setting (System Menu) Buzze
Page 254 and 255:
Default Setting (System Menu) Size
Page 256 and 257:
Default Setting (System Menu) Addin
Page 258 and 259:
Default Setting (System Menu) Paper
Page 260 and 261:
Default Setting (System Menu) Paper
Page 262 and 263:
Default Setting (System Menu) 11 Pr
Page 264 and 265:
Default Setting (System Menu) Plain
Page 266 and 267:
Default Setting (System Menu) Defau
Page 268 and 269:
Default Setting (System Menu) 9 Pre
Page 270 and 271:
Default Setting (System Menu) Prese
Page 272 and 273:
Default Setting (System Menu) Error
Page 274 and 275:
Default Setting (System Menu) Funct
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Default Setting (System Menu) File
Page 284 and 285:
Default Setting (System Menu) Zoom:
Page 286 and 287:
Default Setting (System Menu) Commo
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Default Setting (System Menu) Borde
Page 298 and 299:
Default Setting (System Menu) Finis
Page 300 and 301:
Default Setting (System Menu) Detai
Page 302 and 303:
Page 304 and 305:
Default Setting (System Menu) Optio
Page 306 and 307:
Default Setting (System Menu) 7 Ent
Page 308 and 309:
Default Setting (System Menu) Photo
Page 310 and 311:
Default Setting (System Menu) AutoP
Page 312 and 313:
Page 314 and 315:
Default Setting (System Menu) Selec
Page 316 and 317:
Default Setting (System Menu) Use t
Page 318 and 319:
Default Setting (System Menu) Check
Page 320 and 321:
Default Setting (System Menu) • S
Page 322 and 323:
Default Setting (System Menu) Quick
Page 324 and 325:
Default Setting (System Menu) Print
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Default Setting (System Menu) Orien
Page 334 and 335:
Default Setting (System Menu) Wide
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Default Setting (System Menu) Send
Page 346 and 347:
Default Setting (System Menu) Adjus
Page 348 and 349:
Default Setting (System Menu) Manua
Page 350 and 351:
Default Setting (System Menu) IMPOR
Page 352 and 353:
Default Setting (System Menu) Norma
Page 354 and 355:
Default Setting (System Menu) 8 De
Page 356 and 357:
Default Setting (System Menu) Corre
Page 358 and 359:
Default Setting (System Menu) Servi
Page 360 and 361:
Default Setting (System Menu) Servi
Page 362 and 363:
Default Setting (System Menu) Date/
Page 364 and 365:
Default Setting (System Menu) NOTE:
Page 366 and 367:
Page 368 and 369:
Default Setting (System Menu) Sys.
Page 370 and 371:
Default Setting (System Menu) secon
Page 372 and 373:
Default Setting (System Menu) Login
Page 374 and 375:
Default Setting (System Menu) Timer
Page 376 and 377:
Page 378 and 379:
Default Setting (System Menu) Editi
Page 380 and 381:
Default Setting (System Menu) Enter
Page 382 and 383:
Default Setting (System Menu) Path:
Page 384 and 385:
Page 386 and 387:
Default Setting (System Menu) Enter
Page 388 and 389:
Default Setting (System Menu) Detai
Page 390 and 391:
Page 392 and 393:
Default Setting (System Menu) Overw
Page 394 and 395:
Default Setting (System Menu) Netwo
Page 396 and 397:
Default Setting (System Menu) Syste
Page 398 and 399:
Default Setting (System Menu) Ether
Page 400 and 401:
Page 402 and 403:
Default Setting (System Menu) Proto
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Default Setting (System Menu) Sys.
Page 410 and 411:
Default Setting (System Menu) Secur
Page 412 and 413:
Default Setting (System Menu) Rule
Page 414 and 415:
Default Setting (System Menu) USB H
Page 416 and 417:
Default Setting (System Menu) Optio
Page 418 and 419:
Default Setting (System Menu) Secur
Page 420 and 421:
9 Maintenance This chapter describe
Page 422 and 423:
Maintenance Cleaning the paper tran
Page 424 and 425:
Maintenance 4 Make sure the release
Page 426 and 427:
Maintenance 4 Open the cap of the n
Page 428 and 429:
10 Troubleshooting This chapter exp
Page 430 and 431:
Troubleshooting Symptom Checkpoints
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Troubleshooting Error Message Check
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Troubleshooting Online Help Message
Page 446 and 447:
Troubleshooting Paper jam in the pa
Page 448 and 449:
Troubleshooting 2 Open the left cov
Page 450 and 451:
11 Management This chapter explains
Page 452 and 453:
Management Sys. Menu/Count.:a b ***
Page 454 and 455:
Management Login/Logout Once you en
Page 456 and 457:
Management User Login Set.: a b 1 U
Page 458 and 459:
Management 1 See the procedure for
Page 460 and 461:
Management 4 Press the or key to
Page 462 and 463:
Management Job Accounting Job accou
Page 464 and 465:
Management Login/Logout If job acco
Page 466 and 467:
Management Menu: a b 1 Detail/Edit
Page 468 and 469:
Management Overwrite. Are you sure?
Page 470 and 471:
Management Restriction Items [Spli
Page 472 and 473:
Management Limit Pages: D b (1 - 99
Page 474 and 475:
Management Default Counter Limit Wh
Page 476 and 477:
Management Counting the Number of P
Page 478 and 479:
Management 1 See the procedure for
Page 480 and 481:
Management Printing an Accounting R
Page 482 and 483:
Management Checking the Counter You
Page 484 and 485:
Appendix • Optional Equipment....
Page 486 and 487:
Precautions for Handling the Memory
Page 488 and 489:
Optional Function You can use the o
Page 490 and 491:
System: a b ********************* 1
Page 492 and 493:
Selecting Type of Characters To ent
Page 494 and 495:
Characters associated with differen
Page 496 and 497:
Supported types Supported paper siz
Page 498 and 499:
Choosing the Appropriate Paper This
Page 500 and 501:
Curl: Most paper naturally tends to
Page 502 and 503:
Envelopes Envelopes should always b
Page 504 and 505:
Coated Paper Coated paper is create
Page 506 and 507:
Sharpness adjustment Adjust the sha
Page 508 and 509:
Item Without FAX function Descripti
Page 510 and 511:
Scanner Item Operating System Syste
Page 512 and 513:
Glossary AppleTalk AppleTalk, which
Page 514 and 515:
NetWare Novell's network management
Page 516 and 517:
Index Index Numerics 1-sided/2-side
Page 518 and 519:
Index J Job Available Status 7-2 Ca
Page 520 and 521:
Index Sending Size Selection 5-4 Se
Page 525 and 526:
First edition 2011.4 2MAKMEN000
show all

user manual - Utax

Create successful ePaper yourself

Delete template?

Save as template?