CM100 Advanced Manual (GB).pdf (1.347,89kb) - Viscount ...

VISCOUNT CM-100
Pipe Organ Module
For example, if only two speakers are connected, they will be shown as follows:
Gedackt16 1 2 Width:15
Windchest:0 Center: 8
If there are 3 speakers, the instrument automatically redistributes the windchest effect in the new
configuration, so speaker 2 will carry the central part of the panorama and the third the left part. On the
display the new situation will be shown as follows:
Gedackt16 1 2 3 Width:15
Windchest:0 Center: 8
and the message "no line outs”
Gedackt16 no line out Width:15
Windchest:0 Center: 8
indicates that, at present, there are no speakers connected and therefore the windchest will not be
activated. Similarly, the message " wrong line out":
Gedackt16 wrong line out Width:15
Windchest:0 Center: 8
informs the user that the speakers have not been connected in accordance with the rule that the first
speaker must always be connected to output 1 proceeding in consecutive sequence, leaving no gaps
between two connected speakers.
The parameters on the right-hand side of the display are the parameters for adjustment of the active
windchest, and their function changes depending on its physical characteristics.
For central peak and wing windchests (all versions), the parameters available relate to the Width of the
windchest and the position of its Centre within the acoustic panorama created by the speakers
connected.
As an example, let us take a left-hand wing windchest
Gedackt16 1 2 3 Width:15
Windchest:2 Center: 8
If we reduce the value of the Width field (selected using the cursor keys) we will see that the windchest
becomes narrower, and therefore the sound of the stop will be re-allocated within the acoustic panorama:
in this case, it will no longer be present on outputs 1 and 3.
ENGLISH
Gedackt16 1 2 3 Width: 9
Windchest:2 Center: 8
Page 20