Daelim Roadwin 125cc Owners Manual.pdf - Mojo
Daelim Roadwin 125cc Owners Manual.pdf - Mojo
Daelim Roadwin 125cc Owners Manual.pdf - Mojo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WHEEL REMOVAL<br />
[FRONT WHEEL REMOVAL]<br />
1. Raise the front wheel off the ground by<br />
placing a support block under the<br />
engine.<br />
2. Loose the oval screw and remove the<br />
speedometer cable.<br />
3. Remove the front caliper assembly<br />
from the fork by removing the fixing<br />
bolts.<br />
4. Loosen the axle nut.<br />
AXLENUT<br />
FIXINGBOLTS<br />
BRAKECALIPER<br />
ASSEMBLY<br />
NOTE<br />
●Do not depress the brake lever when<br />
the wheel is off the motorcycle.<br />
The caliper piston will be forced out<br />
of the cylinder with subsequent loss<br />
of brake fluid. If this occurs,<br />
servicing of the brake system will be<br />
necussary. See your authorized<br />
<strong>Daelim</strong> dealer for this service.<br />
5. Withdraw the front wheel axle, side<br />
collar and remove the front wheel.<br />
FRONTWHEELAXLE<br />
INSTALLATION NOTES:<br />
●Position the front wheel between the<br />
fork legs and insert the axle from the<br />
right side, through the left fork leg and<br />
wheel hub.<br />
CAUTION<br />
●When installing the wheel, carefully<br />
fit the left brake disk between the<br />
brake pads to avoid damaging the<br />
pads.<br />
●Prior to assembling, align the projected<br />
part( ) of the speedometer gear box<br />
with the projected part of the left front<br />
fork.<br />
PROJECTEDPART<br />
OVALSCREW<br />
SPEEDOMETER<br />
CABLE<br />
41
Change language