Man_AL32_eng_v9723_2.. - FF-Automation

Page 6 - 1226/10/2001AutoLog 32 Instruction ManualThe system program makes the comparisons as follows:GM0 (=L0) := CA (EPA - TA) or CA (EPA + TA)GM1 (=L1) := CA (EPA - DDA) or CA (EPA + DDA)GM2 (=L2) := CA EPAGM8 (=L4) := CB (EPB - TB) or CB (EPB + TB)GM9 (=L5) := CB (EPB - DDB) or CB (EPB + DDB)GM10 (=L6) := CB EPBCX = Contents of counter XDDX = Deceleration distance of counter XEPX = End point of counter XTX = End point tolerance of counter Xwhere X is A, B, C, or D.GM16 (=L8) := CC (EPC - TC) or CC (EPC + TC)GM17 (=L9) := CC (EPC - DDC) or CC (EPC + DDC)GM18(=L10) := CC EPCGM24(=L11) := CD (EPD - TD) or CD (EPD + TD)GM25(=L12) := CD (EPD - DDD) or CD (EPD + DDD)GM26(=L14) := CD EPDCXEPXTXGM0, 8, 16, 24DDXGM1, 9, 17, 25GM2, 10, 18, 26The following program transfers the pulse count and count rate of counter A of the AL32 to the AL 1093 Display and keypad unit. The counter is reset by means of input 0.STR R C 000EQ R M 240STR R C 001EQ R M 212STR C 001EQ GM 065EQ GM 066EQ GM 069PRT("COUNTER:",R M 70,R M 69,R M 68,,"f:",R M 66, R M 65&R M 64,,)STR I 000INVEQ GM 067STOPThe display will show:COUNTER:500000f:000000 12:30FF-Automation Oy