Indoor unit

CeilingHanging bolt(W3/8 or M10)Nut(W3/8 or M10)Keep the length of the boltfrom the bracket to 40mmFlat washer for M10(accessory)Ceiling boardAir Conditioner body150mmCeiling boardFlat washer for M10(accessory)Nut(W3/8 or M10)Paper modelfor installationKeep the length of 15~18mmbetween the air conditioner bottomsurface and the ceiling surfaceSet screw ofpaper model (4 pieces)Open the ceiling boardalong the outer edge of thepaper modelCassette 4-way• The following parts are locally purchased.Hanging Bolt - W 3/8 or M10Nut- W 3/8 or M10Spring Washer - M10Plate Washer - M10CAUTION• Tighten the nut and bolt to prevent the unitfrom falling.10.3 Wiring ConnectionConnect the wires to the terminals on the control board individually according to the outdoor unit connection.• Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unitrespectively.Remotecontrol cordIndoorpower cord• TE ChassisTerminal Block Indoor1(L) 2(N) 3 4SODU IDU INTERNET DRY1 DRY2 GND 12VB A - - B A - - - -OutdoorUnitINDOOR POWER INPUT• TM/TN/TP ChassisTerminal Block Indoor1(L) 2(N) 3(L) 4(N) 5(A)5(B)SODU IDU INTERNET DRY1 DRY2 GND 12VB A - - B A - - - -OutdoorUnitPOWERINPUTTO AIRFRESH KITWARNINGMake sure that the screws of the terminal are not loose.Ceiling Cassette 4-way Indoor unit3-31