FinePix F401 Owner's Manual - Fujifilm Canada

4 AdvancedFeatures Playbackw MODEPLAYING BACK MOVIES (VIDEO)101 02 201■ Controlling Movie PlaybackControlDescriptionPlaybackThe movie automatically stops when playback ends.02Pause/ResumePauses the movie during playback.Press this button again to resume playback.StopStops playback.✽ Press “d” or “c” while movie playback is stopped to go backto the previous file or advance to the next file respectively.561Set the Mode switch to “Q”.2Press “d” or “c” to select a movie file.●! Movies cannot be played back using multi-frameplayback. Use the “DISP” button to select normalplayback.Indicated by the “u” icon.1 Press “b({)” to play the movie.2 The LCD monitor shows the playback timeand a playback progress bar.●! Take care not to block the speaker.●! If the sound is difficult to hear, adjust the volume(➡P.77).●! If the subject of the movie is very bright, whitestreaks may appear on the image during playback.This is normal and is not a fault.Fast forward/RewindSkip playbackRewindWhen pausedFast forwardPress these during playback to skip forwards or backwardsthrough the movie.i Each time you press “d” or “c” when the movie is paused,the movie advances or goes back one frame.i Hold down the button to move through the frames quickly.✽ Refer to the Software Quick Start Guide (provided) for information on playing back movies on your PC.◆ Compatible movie files ◆You can use the FinePix F401 to play back movie files recorded on a FinePix F401 or movie files (10 fps)up to 120 seconds long shot at 320 × 240 pixels on a FUJIFILM digital camera and then recorded on a 3.3Volt SmartMedia. Movies recorded using a FinePix F601/S602 cannot be played back on this camera.574