Usermanual

Unit 2: Technical DataSENSINGGapReflective Eye-MarkRibbon Near EndMedia OutRibbon OutCover OpenPosition & Sensitivity AdjustablePosition & Sensitivity AdjustableFixed (enabled/disabled)Fixed (always enabled)Fixed (always enabled)Fixed (always enabled)MEDIAWidthLength (Continous)Length (Tear-Off)Media Width: 0.87 to 5.04 Inches (22 - 128mm)Media Width with Backing Paper: 0.98 to 5.16 Inches (25 - 131mm)Media Length: 0.24 to 15.63 Inches (6 - 397mm)Media Length with Backing Paper: 0.35 to 15.75 Inches (9 - 400mm)Media Length: 0.67 to 15.63 Inches (17 - 397mm)Media Length with Backing Paper: 0.79 to 15.75 Inches (20 - 400mm)Roll or Fan-FoldTypeEye-Mark or GapDirect Thermal or Thermal TransferThickness 0.002 to 0.010 Inches ( 0.06 - 0.268 mm)Roll DiameterMaximum: 10.43 Inches (265mm)Core Diameter1.5 to 4.0 Inches (38.1 - 101.6mm)Wind DirectionFace In, Face Out (linerless only)Fan-Fold HeightMaximum: 7.87 Inches (200mm)RIBBONWidthMaximum: 5.04 Inches (128mm)Length1476 Feet (450M)WoundFace In, Face OutCore Diameter 1.00 Inch (25.6 mm)Roll DiameterMaximum: 3.35 Inches (85 mm)REGULATORYFCC Part 15, Subpart B, Class BRadiation NoiseEN55022 Class BStatic Electricity IEC61000-4-2, Level 3AC Line NoiseAbove: 1000Vp-pPacking Drop StandardISTA-2AChromium: below 0.1%Lead: below 0.1%Mercury: below 0.1%Environmental (RoHS)Cadmium: below 0.01%Polybrominated Bipheny (PBB): below 0.1%Polybrominated Diphenyl Ether (PBDE): below 0.1%GL408-412e Operator’s Manual 2-3