Usermanual

Unit 4: Printer ConfigurationUNIVERSAL SERIAL BUS (USB) INTERFACE MODEThis chapter provides the programming sequences required for USB interface setup. Use the keys of the printer’soperator panel to select and enter the required options.Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.ATTENTION: Perform the following programming sequence only if this is the interfacetype to be used. Instead, refer to the appropriate interface programming chart.POWERONLINELINEOFFLINEIgnore CR/LFNo*FUNCTIONINTERFACESItem No. CheckDisable*BCC CheckDisable*InterfaceModeENTERHistory BufferTemporary*INTERFACESIgnore CR/LFItem No. CheckBCC CheckHistory BufferComm. ProtocolHost InterfaceParallel PortUSB PortSerial PortPrinter MgmtComm. ProtocolStatus 5*INTERFACESHost InterfaceINTERFACESHost InterfaceHost InterfaceIgnore CR/LFENTERUSB PortUSB PortAuto Switching*USB*Buffer Size in KScreensonly display ifAdmin User isenabled withinAdvancedModeBuffer Size in K1 to 16KB*Timeout10 sec*Figure 4-7, USB Interface ModeGL408-412e Operator’s Manual 4-10