TECHNICAL & SERVICE MANUAL Ceiling Cassettes ... - Engvent.ru

● Wireless remote controllerPLA-RP3AA.UK, PLA-RP4AA.UK, PLA-RP5AA.UK, PLA-RP6AA.UKCHECK TEST RUN displayCHECK&TEST RUN display indicates thatthe unit is being checked or test-run.MODEL SELECT displayBlinks when model is selected.displayLights up while transmission to the indoorunit is mode using switches.displaySET TEMP. display indicates desired temperatureset.displayOPERATION MODE displayOperation mode display indicates which operationmode is in effect.displayThe vertical direction of air flow is indicated.displayFAN SPEED display indicates which fanspeed has been selected.ON/OFF buttonThe unit is turned ON and OFF alternatelyeach time the button is pressed.FAN SPEED SELECT buttonUsed to change the fan speed.MODE SELECT buttonUsed to switch the operation mode betweencooling, drying, blowing, heating and automode.w In case the outdoor unit is cool only type,the heating mode is not available.CHECK-TEST RUN buttonOnly press this button to perform an inspectioncheck or test operation.Do not use it for normal operation.VANE CONTROL buttonUsed to change the air flow direction.ON/OFF TEMPMODECHECKCHECK TEST RUNMODEL SELECT ˚CAMPMAMPMNOT AVAILABLEFAN AUTO STOPVANE AUTO STARTLOUVER hTEST RUNminSET RESET CLOCKCLOCK displayDisplays the current time.TIMER displayDisplays when in timer operation or whensetting timer.“ ” “ ” displayDisplays the order of timer operation.“ ” “ ” displayDisplays whether timer is on or off.buttonSET TEMPERATURE button sets any desiredroom temperature.TIMER CONTROL buttonsAUTO STOP (OFF timer): when this switchis set, the air conditioner will be automaticallystopped at the preset time.AUTO START (ON timer): when this switchis set, the air conditioner will be automaticallystarted at the preset time.h and min buttonsButtons used to set the “hour and minute” ofthe current time and timer settings.LOUVER buttonThis switch the horizontal fan motion ONand OFF.(Not available for this model.)CLOCK buttonRESET buttonSET button6