You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION 172. Installing the remote control devices! WARNINGWhen using other than <strong>Tohatsu</strong>'s genuineremote control box, DO NOT select theone without neutral safety switch thatprevents in-gear start.Use of remote control box without neutralsafety switch can allow start of engine withgear at other than neutral shift, potentiallyleading passengers to falling or causingpassenger to be thrown overboard.It is recommended that you consult withyour authorized dealer for installationand adjustment of the remote controldevice.■ Installation of the Remote ControlCables (Box side) :Follow the instruction manualprovided with the remote control.Remote control cable2 Fitting of Remote Control Cable toEngine.NoteLock nutCable jointApprox. 10mm(0.39 inch)Put the control lever in the Neutralposition and the Free Accel lever inthe fully closed position.4■ Installation of the Remote Controlon your boat :Follow the instruction manualprovided with the remote control.CableHarness BShift CableThrottle Cable■ Installation of the Remote ControlCable (engine side) and the CordAssembly (Wiring Harness) :1 Fitting of connecting parts tocablesDrag LinkScrew the tip of the remote controlcable into the cable joint up toapprox. 10 mm (0.39 inch), then lockthem with a lock nut. Apply grease tothe hole of the cable joint.! CAUTIONBe careful not to loop the remote control cablesto a diameter of 406 mm (16 inches) or less.
Change language