15C 20C MFS - Tohatsu

18 INSTALLATION4NoteConfirm whether the shift of engineis in gear when shifting the controllever of the Remote Control to its firstposition in Forward or Reverse (about32˚) and whether the throttle valveis fully open when shifting the leverfurther.Confirm whether the throttle valve isfully closed when the control lever isshifted to the Neutral position.3 Connecting the Cord assembly(Wiring Harness)Connect cable harness B to cableharness A.Location of the connectors is near therecoil starter of starboard side in thecowl.Cable Harness A(Outboard motor side)Cable Harness B(From remote control)! WARNINGDo not disconnect the cord assemblywhen the outboard motor is inoperation or you will lose control of theoutboard motor.3. Installing the battery1 P l a c e t h e b a t t e r y b o x i n aconvenient position away frompossible water spray. Securelyfasten both the box and the batteryso they do not shake loose.! WARNINGBattery electrolyte contains sulfuric acidand thus is hazardous, causing a burnif it comes in contact with your skin, orpoisonous if swallowed.Keep battery and electrolyte away fromreach of childrenWhen handling the battery, be sure to;● Read all warnings shown on thebattery case● Prevent electrolyte from coming incontact with any part of your body.Contact can cause serious burn or,if it comes in contact with your eye,loss of sight. Use safety glasses andrubber gloves.In case battery electrolyte comes incontact with :● Skin, flush thoroughly with water.● Eye, flush thoroughly with water,and then seek immediate medicaltreatment.In case battery electrolyte is swallowed :● Seek immediate medical treatment.