15C 20C MFS - Tohatsu

More documents

Recommendations

Info

46 ADJUSTMENTADJUSTMENT1. Steering friction 2. Throttle gripAdjust this lever to achieve thedesired steering friction (drag) onthe tiller handle. Move lever towards(a) to tighten friction and move levertowards (b) to loosen friction.Friction adjustment of the throttlegrip can be made with the throttleadjustment screw.LighterHeavier9aHeavierbLighter! WARNINGDo not increase throttle frictionexcessively, or heavy movement ofthrottle grip or remote control levermovement could cause loss of throttlecontrol potentially leading to accident.3. Remote Control Lever Load(Throttle friction adjustment screw)To adjust the load of the remotecontrol lever, turn the throttle frictionadjustment screw on the front ofthe remote control. Turn clockwiseto increase the load and counterclockwiseto decrease it.LighterHeavierThrottle frictionadjustment screw
ADJUSTMENT 474. Trim Tab AdjustmentIf straight-line cruising can not beachieved, adjust the trim tab locatedunder the anti-ventilation plate.◎ If the boat veers toward the right,direct the trim tab towards A.◎ If the boat veers toward the left,direct the trim tab towards B.BA! WARNING● Be sure that outboard motor issecured to transom or servicestand, or accidental drop or fall ofoutboard motor could lead to severepersonal injury.● Be sure to lock outboard motor ifit is tilted up, or accidental fall ofoutboard motor could lead to severepersonal injury.● Do not go under outboard motortilted up and locked, or accidentalfall of outboard motor could lead tosevere personal injury.Trim tabNotes● The trim tab also acts as an anodeto prevent electrolytic corrosion.Therefore do not paint or greasethis part.● After adjustment securely tightenthe trim tab fixing bolt.● Check for looseness of the bolt andthe trim tab at regular intervals.9! WARNING● Inappropriate adjustment of trim tabcould cause steering difficulty. Afterinstalling or readjusting trim tab,check if steering load is even.● Tighten trim tab bolt to specifiedtorque.
Page 1 and 2: OWNER’SMANUALMFS15C20COB No.003-1
Page 6 and 7: 1011121314INSPECTION AND MAINTENANC
Page 9 and 10: GENERAL SAFETY INFORMATION 9SAFE OP
Page 11 and 12: SPECIFICATIONS 11EP , EPT1ItemMODEL
Page 13 and 14: NAMES OF PARTS 132Power Tilt TypeEP
Page 15 and 16: INSTALLATION1. Mounting the outboar
Page 17 and 18: INSTALLATION 172. Installing the re
Page 19 and 20: INSTALLATION 19NoteMinimum recommen
Page 21 and 22: PRE-OPERATING PREPARATIONS 21becaus
Page 23 and 24: PRE-OPERATING PREPARATIONS 23! CAUT
Page 25 and 26: PRE-OPERATING PREPARATIONS 257. Eng
Page 27 and 28: ENGINE OPERATION 27! WARNINGWhen op
Page 29 and 30: ENGINE OPERATION 29! CAUTIONWhen us
Page 31 and 32: ENGINE OPERATION 31SlowlyQuicklyNot
Page 33 and 34: ENGINE OPERATION 336
Page 35 and 36: ENGINE OPERATION 355. Forward and r
Page 37 and 38: ENGINE OPERATION 376. StoppingEP, E
Page 39 and 40: ENGINE OPERATION 39EFT, EPT type■
Page 41 and 42: ENGINE OPERATION 41■ Shallow wate
Page 43 and 44: ENGINE OPERATION 43EFT, EPT typeThe
Page 45: TRAILERING! WARNINGDo not go under
Page 49 and 50: INSPECTION AND MAINTENANCE 491. Dai
Page 51 and 52: INSPECTION AND MAINTENANCE 51Washin
Page 53 and 54: INSPECTION AND MAINTENANCE 53Replac
Page 55 and 56: INSPECTION AND MAINTENANCE 55! CAUT
Page 57 and 58: INSPECTION AND MAINTENANCE 57NotesD
Page 59 and 60: INSPECTION AND MAINTENANCE 59Cleani
Page 61 and 62: INSPECTION AND MAINTENANCE 613. Off
Page 63 and 64: INSPECTION AND MAINTENANCE 636. Col
Page 65 and 66: TROUBLESHOOTING 65Engine falling to
Page 67 and 68: TOOL KIT AND SPARE PARTSTOOL KIT AN
Page 69 and 70: PROPELLER TABLEPROPELLER TABLE 69Us
Page 72: OWNER’S MANUALMFS15C20CTOHATSU CO

15C 20C MFS - Tohatsu

Create successful ePaper yourself

Delete template?

Save as template?