15C 20C MFS - Tohatsu

PRE-OPERATING PREPARATIONS 23! CAUTIONBe sure to use EPA approved tankand EPA approved primer bulb/hoseassembly as a set. Confirm shapes ofEPA approved tank and regular tank.Except for U.S. model(regular tank)For U.S. and Canada model(EPA approved tank)5. Recommended engine oilUse only high quality 4-strokeengine oil to insure performance andprolonged engine life.Use NMMA FC-W certified 4-strokeengine oil below.10W-30: is recommended for use inall temperature.25W-40: may be used at temperaturesabove 4˚C (40˚F).You can also use oils that carry theAPI rating of SF, SG, SH, SJ, SL, orSM. Select the appropriate viscosity,based on atmospheric temperature,from the chart below.20W−40, 20W−505ENGINEOIL15W−40, 15W−5010W−40, 10W−5010W−30-30-22-20-4-101403210502068Atmospheric temp.30864096˚C˚F! CAUTIONThe engine oil is drained for shippingfrom the factory. Be sure to fill theengine to the proper level beforestarting engine. (To properly fill theengine with oil follow the instructions insection 9 of this manual)NoteUse of engine oils that do not meetthese requirements will result inreduced engine life, and other engineproblems.