Product: S4 - Landis+Gyr
Product: S4 - Landis+Gyr
Product: S4 - Landis+Gyr
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Landis+Gyr</strong><strong>Product</strong> Update07-0119-1<strong>Product</strong>: Software and Meter CompatibilitySubject: Communication Compatibility of Operating Systems, Software and MetersDate: January 19, 2007Description: This document is a detail of which Windows operating systems, L+G software’s,and L+G meters are to be used together (in combination) to facilitate communication.Residential, Commercial and Industrial <strong>Product</strong>s:Present <strong>Product</strong>s;Meters (DGcom protocol)Software (Windows based)Meter (ANSI protocol)Software (Windows based)DXMX, AX<strong>S4</strong>, AX<strong>S4</strong>e (<strong>S4</strong>e may also be ANSI protocol)1132Prog & 1132ComProview32 (1150w, Totalizer, AutoDialer, ReportQ)(1132Gyr will be replacing Proview32 in the near future)ProPakUtilitiesFocusFocus Config ToolNote: The above software is designed to run on Windows 2000, or XP Pro service pack 2.Legacy <strong>Product</strong>s;Use Windows 98 2 nd ed. (DOS based operating system)Meters (Optocom protocol)(DGcom protocol)Software (DOS based)PDRA, PDRJ, all D series registers, CTR, ZMC, and DG100DXMS, DXS2, RXS3 (these 3 meters can also beprogrammed and read by 1132Prog/Com)DG1100*Proview* (DG1150w, Totalizer, AutoDialer, ReportQ)* Note: The final version of DG1100 was 5.23, and the final version of Proview was 2.52. Also, theDG1100 software needs to be run in the pure DOS mode. These software packages are no longermaintained by Technical Support.<strong>Landis+Gyr</strong> Inc.2800 Duncan Rd. Tel: (800) 777-2774Lafayette, IN 47904-5012 Fax: (765) 742-0936
<strong>Landis+Gyr</strong><strong>Product</strong> Update07-0119-1High End, Industrial and Grid Metering <strong>Product</strong>s:Present <strong>Product</strong>s;Meters Maxsys 2510 and Maxsys 100(Maxsys Elite to be available in 2007)SoftwareMapper 32 (for programming)Maxcom (for communication, data retrieval)Maxtrack (report generation; to be replaced by MaxGyr in 2007)Q4FL (flash loader)EVM (event monitoring software)Legacy <strong>Product</strong>s;MetersSoftwareQuad 4, Quad 4+ and S200ExpThe above software will also communicate with these products.* Note: All meter products use “Type 7” protocol, and all software is designed for installation onWindows 98 2 nd Edition, Windows 2000, or XP Pro service pack 2.In addition to the above communication compatibility information, below are the opticalprobes that have been tested and known to interface effectively with our products.L+G AIP 200 (USB port): use on DGcom, ANSI, Type 7, and IEC protocolsL+G USB 200 (USB port): use on DGcom, and ANSI protocolsL+G DGcom (serial port): use on Optocom, DGcom, and ANSI protocolsData Net PM500 (serial port): use on DGcom, ANSI, and Type 7 protocolsGE Smartcoupler (USB port): use on DGcom, ANSI, and Type 7 protocolsIf you have additional questions or comments about this notice, please contact <strong>Landis+Gyr</strong>technical support center at 800-777-2774.<strong>Landis+Gyr</strong> Inc.2800 Duncan Rd. Tel: (800) 777-2774Lafayette, IN 47904-5012 Fax: (765) 742-0936
Change language