Iris V1.1 Baseboard - Toradex

Iris Carrier Board Datasheet4. Assembly OptionsThis section describes the assembly options that can be used to configure different features andfunctional options.The following table lists all the assembly options that have been described in the previous pages ofthis document.Solution Selected Assembly option Section n. PCB sideSEL1 to LVDS_3.3V Disassemble R44 and assemble R40 2.2.4 TopSEL2 to LVDS_3.3V Disassemble R37 and assemble R41 2.2.4 TopSEL2 to GND Disassemble R37 and assemble R45 2.2.4 TopSEL3 to GND Disassemble R46 and assemble R42 2.2.4 TopPWM_A not used for the RGB connector Disassemble the resistor R84 2.2.11 TopANALOG_IN3 Disassemble the resistor R88 2.2.11 TopPWM_D for PXA3XX modules Assemble the resistor R110 2.2.11 BottomUse the internal RGB to VGA R14, R15, R16, R19, R20 3.1 BottomUse the Colibri T20 FFC VGA signals R17, R18, R21, R22, R23 3.1 BottomSD Boot (only with Colibri T20) Assemble 100 Ω resistors R109, R111, R112, R113 2.2.13 Bottom4.1. Iris Assembly Options - TopR63R91R43R75R63R75R43R91R88R88R37R45R41R46 R42R84R44 R40R37R45R41R46 R42R84R44 R40Fig.6 Iris Assembly Options – Top SideToradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 500 48 00 l www.toradex.com l info@toradex.com Page | 20