Iris V1.1 Baseboard - Toradex

More documents

Recommendations

Info

Iris Carrier Board Datasheet2.2. Top Side Connectors: Pin Assignments2.2.1 Colibri SODIMM Connector (X1)Type: SODIMM 200 Socket.Manufacturer: Tyco Electronics-1473005-1.For the pin out of the Colibri module please refer to the Colibri Datasheet.2.2.2 DVI-I Connector (X4)PinDescription1 TMDS_DATA2_N2 TMDS_DATA2_P3 GND4 NC5 NC6 DDC_CLK7 DDC_DATA8 CRT_VSYNC9 TMDS_DATA1_N10 TMDS_DATA1_P11 GND12 NC13 NC14 +5V15 GND16 HOTPLUG_DETECT17 TMDS_DATA0_N18 TMDS_DATA0_P19 GND20 NC21 NC22 GND23 TMDS_CLK_P24 TMDS_CLK_NC1C2C3C4C5CRT_REDCRT_GREENCRT_BLUECRT_HSYNCAGNDToradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 500 48 00 l www.toradex.com l info@toradex.com Page | 8
Iris Carrier Board Datasheet2.2.3 Central Tab Jumper (JP2)Jumper JP2 should be configured based upon the Ethernet controller which is present on the installedColibri module.Jumper positionDescription1-2 Use this configuration for DM9000E on PXA2702-3 Use this configuration for DM9000A/ASIX on other modules2.2.4 LVDS Connector (X7)Connector type: DF13A-20DP-1.25v(56)Pin Signal Name Description1 LVDS_5V 5V power supply pin2 LVDS_3.3V 3.3V power supply pin3 GND4 SEL1 Connected to LVDS_3.3V or GND via assembly option. The default assembly is GND5 LVDS_OUT0_N The negative LVDS output number 06 GND7 LVDS_OUT0_P The positive LVDS output number 08 LVDS_OUT1_N The negative LVDS output number 19 GND10 LVDS_OUT1_P The positive LVDS output number 111 LVDS_OUT2_N The negative LVDS output number 212 GND13 LVDS_OUT2_P The positive LVDS output number 214 LVDS_CLK_N The negative LVDS clock signal15 GND16 LVDS_CLK_P The positive LVDS clock signal17 BL_ON Back Light control signal18 GND19 SEL2 Connected to LVDS_5V, LVDS_3.3V or GND via assembly option. The default assembly is5V20 SEL3 Connected to LVDS_3.3V or GND via assembly option. The default assembly is LVDS_3.3VRemarks:• The Signals SEL1, SEL2, SEL3 can be configured to be connected to LVDS_5V, LVDS_3.3Vor GND. By default the resistors R37, R42 and R44 have been populated. For the location ofthese resistors please refer to the section 4.• Please use the pins 1 and 2 as power supply pins (max 0.9A) and the SEL1, SEL2, SEL3 assetting pins.Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 500 48 00 l www.toradex.com l info@toradex.com Page | 9
Page 1 and 2: Iris V1.1 BaseboardDatasheet
Page 3 and 4: Iris Carrier Board DatasheetContent
Page 5 and 6: Iris Carrier Board Datasheet1. Intr
Page 7: Iris Carrier Board Datasheet2. Iris
Page 11 and 12: Iris Carrier Board DatasheetPinSign
Page 13 and 14: Iris Carrier Board Datasheetresisto
Page 15 and 16: Iris Carrier Board Datasheet14 HOTP
Page 17 and 18: Iris Carrier Board Datasheet2.5. LE
Page 19 and 20: Iris Carrier Board Datasheet• The
Page 21 and 22: Iris Carrier Board Datasheet4.2. Ir
Page 23 and 24: Iris Carrier Board Datasheet5.1.2 I
Page 25: Iris Carrier Board DatasheetDisclai

Iris V1.1 Baseboard - Toradex

Create successful ePaper yourself

Delete template?

Save as template?