You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.5.Master-slave operation1.Unplug from the mains before installation.2.Connect the LED stripes to the fixtures.3.Connect the DMX output of the master fixture in the data-chain with the DMX input of the first slave. Alwaysconnect output with the input of the next slave until all slaves are connected.Up to 32 fixtures can be connectedin master/slave chain4.Insert the termination plug (with 120 Ohm) into DMX input of the master fixture and into the DMX output ofthe last slave fixture in the link in order to ensure proper transmission on the data link.5.Connect the fixtures to the mains.6.See chapter "Stand-alone mode" in order to set the fixture as a master or slave.
Change language