10.07.2015 Views

1986-2012 Sportster® & Buell - S&S Cycle

1986-2012 Sportster® & Buell - S&S Cycle

1986-2012 Sportster® & Buell - S&S Cycle

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>1986</strong>-<strong>2012</strong> Sportster ® & <strong>Buell</strong> ®CONTINUED –S&S® Sidewinder® Hot Set Up® Kits for Harley-Davidson® Sportster® and <strong>Buell</strong>®Parts forTwin Cam 96 /103 2007-<strong>2012</strong>Parts forTwin Cam 88 ®1999-2006Parts forEvolution ®1984-1999Parts forSportster ® & <strong>Buell</strong> ®<strong>1986</strong>-<strong>2012</strong>PERFORMANCEKITSParts forVintage Engines1926-1984Parts forX-Wedge®2007-<strong>2012</strong>Performance of an S&S® 89" Sidewinder® Kit with S&S cylinder heads, cam, and carburetorcompared with a stock Harley-Davidson® 1200cc Sportster®. The 89" Sidewinder is our mostpopular kit for Sportster models because it is the largest kit that will fit in the stock frame withminimal frame clearancing.Parts forVictory®, Off-road& MetricRacingProductsNOTES:Crankcase cylinder spigot holes need to be bored to accept the larger cylinders included in these kits. Boring and kit installation available from S&S.Extensive combustion chamber modifications must be performed on stock cylinder heads in order to reduce compression to a reasonable level. Final compression depends on thechamber modifications performed.1991-’03 engines require conversion to <strong>1986</strong>-’90 style pushrod tube assemblies when using adjustable pushrods. Available from S&S at time of order.Stock crankcases must be bored to accept the 35/8" big bore cylinders.<strong>1986</strong>-’90 style pushrod cover assemblies must be used to properly install the 89XLSS kit on 1991-’03 Sportster® models.89" kit – Frames may require minor clearancing–cylinders for this kit are .430" taller than stock.103" kit – Frames require major frame modifications–cylinders for this kit are 1.100" taller than stock–will not fit <strong>Buell</strong>®.Pinion and oil pump drive gears in 1988-’03 models must be replaced with <strong>1986</strong>-’87 style gears when using S&S flywheels. See Page 4-19S&S can provide quality, professional machine shop and engine building service through our remanufacturing program. We can handle any job fromfitting a set of pistons in your cylinders to complete installation of any engine kit. Contact your S&S customer service representative for details.Tools & ShopSuppliesDealer Services& Promo ItemsWarranty &Company PolicyOEM Cross ReferenceAppendix & IndexVisit us at www.sscycle.com4-13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!