1986-2012 Sportster® & Buell - S&S Cycle

1986-2012 Sportster ® & Buell ®S&S ®PINION GEARSHigh quality S&S pinion gears are carefully machined, heat treated and then finishground. S&S color codes match Harley-Davidson® color codes so that replacement iseasy. Just pick the appropriate color S&S gear that matches the color on the damagedstock gear. (See notes.) 1986-'87 style gears are required for all engines with S&Sflywheel assemblies. 1991-'93 style gears are required to match to tooth profiles of S&Scam gears when installed in 2000-up models with stock flywheels.S&S Pinion Gears For 1986-'87Harley-Davidson® Sportster® modelsThese gears are required for S&S flywheelassemblies.Parts forTwin Cam 96 /103 2007-2012Parts forTwin Cam 88 ®1999-2006FITMENT• 1986-up Sportster®• 1994-’02 Buell®S&S Pinion Gears For 1991-'99Harley-Davidson® Sportster® Models.These gears must be used when installingS&S cams in 2000-'12 engines.PERFORMANCEPARTSParts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2012S&S Pinion Shaft Oil Pump Drive Gearfor Harley-Davidson® Sportster® modelsParts forVintage Engines1926-1984Application1986-'87S&S® PINION GEARS FOR 1986-'87 SPORTSTER® – required for all S&S flywheel assemblies 1986-'03Biggest Average SmallestColor Code Blue Red White Green YellowH-D® Part No. (H-D® #24056-86) (H-D® #24057-86) (H-D® #24058-86) (H-D® #24059-86) (H-D® #24060-86)S&S Part No. 33-4152 USA 33-4153 USA 33-4154 USA 33-4155 USA 33-4156 USAParts forX-Wedge®2007-2012Parts forVictory®, Off-road& MetricApplication1991-'12S&S® Pinion Gears for 1991-'12 Sportster® with stock flywheel assemblyBiggest Average SmallestColor Code Blue Red White Green YellowH-D® Part No. (H-D® #24056-91) (H-D® #24057-91) (H-D® #24058-91) (H-D® #24059-91) (H-D® #24060-91)S&S Part No. 33-4162 USA 33-4163 USA 33-4164 USA 33-4165 USA 33-4166 USARacingProductsTools & ShopSuppliesPINION SHAFT COMPONENTS FOR 1986-’03 SPORTSTER® MODELSItem H-D® Part No. 1 S&S Part No.1986-'87 Style Pinion Gear Nut (H-D® #7913) 33-4254 USA1986-'87 Style Pinion Shaft Oil Pump Drive Gear (H-D® #26318-75) 33-4228 USA1Note: No longer available from Harley-Davidson®NOTES:If the stock gear is unmarked and the size is unknown or you are scratch building an engine and have no gear, we recommend that you order a gear in the middle of the size range. Thesesizes were used more often and should provide adequate gear clearance under most circumstances. When in doubt, use a gear from the middle to the small side of the range because acombination of looser fitting smaller gears is less likely to cause binding and premature wear. Consult the chart for the size and appropriate part number required. If you wish to achieveoptimum cam gear to pinion gear fit, consult your factory service manual for instructions on fitting these gears before making a selection. Some sizes, particularly those on and near theends of each range, are available on a limited basis because they are the extremes.Dealer Services& Promo ItemsWarranty &Company PolicyOEM Cross ReferenceAppendix & IndexVisit us at www.sscycle.com4-19