1986-2012 Sportster® & Buell - S&S Cycle

1986-2012 Sportster ® & Buell ®S&S ®TWO CABLE THROTTLE ASSEMBLIESHarley-Davidson® Sportster® models 1987-’03 originally fitted with a constant velocity(CV) carb require conversion to butterfly style throttle cables to work with the S&Sbutterfly type carburetor. The throttle cables shown in the chart below are designed forthis application. S&S Super E carb kits for 2004-’06 Sportster models are designed to acceptthe stock throttle cables.19-0436Parts forTwin Cam 96 /103 2007-2012Parts forTwin Cam 88 ®1999-2006FITMENT• 1986-‘03 Harley-Davidson® Sportster®• 1996-’02 Buell®Parts forEvolution ®1984-1999S&S® THROTTLE CABLE APPLICATION CHARTApplication Fastening Method Length Total Housing Length Vinyl HousingPart No.Open SideClose Side1996-'03 Snap-in 36" 32"USA19-0436USA19-04371986-'95 Threaded 36" 32"USA19-0432USA19-04331996-'02* Buell® Threaded 36" 32"USA19-0430USA19-04311996-up Custom Snap-in 42" 38" USA19-0440USA19-04411986-'95 Threaded 42" 38" 19-0446 19-0447* 1998 and later required Harley-Davidson® throttle assembly #71831-96PERFORMANCEPARTSParts forSportster ® & Buell ®1986-2012Parts forVintage Engines1926-1984Parts forX-Wedge®2007-2012Replacement PartsS&S Universal Throttle Cable ................................... 106-3520Throttle Grip Clamp Set 1985-’95 ..........................USA106-3519Top Throttle Grip Clamp only ............................USA19-0222Bottom Throttle Grip Clamp only . . . . . . . . . . . . . . . . . . . . . . . . .USA19-0220Throttle Grip Clamp Screw(Fits S&S throttle assemblies: Part #19-0448, #19-0449, #19-0482, #19-0450, and #19-0229)each .............................................USA50-004310 pack...........................................USA50-0129Throttle Grip Set. ......................................USA106-3521Right Hand Grip only. ..................................USA19-0225Left Hand Grip only ....................................USA19-0226Cable AdjusterFits S&S throttle assembly part #19-0229. ........................USA19-0223Cable Adjuster Jam NutFits S&S throttle assembly part #19-0229 ..............................19-0227Handlebar Spacing Sleeve4" x 1" O.D. – converts 7⁄8" handlebars to 1" O.D. ..................USA19-0235106-352050-0043106-352119-022319-022719-0235106-3519NOTES:The chart on this page is used only when using throttle cable bracket part #11-2339. This bracket is standard on all S&S® Super E & G carburetor kits for Harley-Davidson®Sportster® models with the exception of the kit for 2004-’06 models.1987-’03 Sportster® models originally fitted with a constant velocity (CV) carb require conversion to butterfly style throttle cables to work with the S&S butterfly type carburetor.S&S Super E carb kits for 2004-’06 Sportster models are designed to accept the stock throttle cables.Parts forVictory®, Off-road& MetricRacingProductsTools & ShopSuppliesDealer Services& Promo ItemsWarranty &Company PolicyOEM Cross ReferenceAppendix & IndexVisit us at www.sscycle.com4-53