1986-2012 Sportster® & Buell - S&S Cycle

1986-2012 Sportster ® & Buell ®S&S ®FORGED ROLLER ROCKER ARMSForged from 8620 steel, heat-treated, and then shot-peened for additional strength andprotection from fatigue, our roller rocker arms were designed to eliminate failure-pronestress areas found in some other rockers. Most rockers come equipped with 1⁄2" longbushings or needle bearings, however, ours use 3⁄4" long bronze bushings. The end result iswhat we believe to be the finest rocker arm available anywhere, for any price.FITMENT• 1986–'12 Harley-Davidson® Sportster®• 1994–’02 Buell®FEATURES AND BENEFITS• Extremely durable rollers reduce side thrusting with high lift cams• Superior wear and fatigue resistance even in the most demanding applications• 3⁄4" long bushings provide 50% more bushing support area than 1⁄2" long bushingsKIT CONTENTS• 2 front and 2 rear rocker armsPART NUMBERSSet of 4 rocker arms .....................................900-4065AReplacement PartsFront exhaust or rear intake ..............................900-4065FARear exhaust or front intake ..............................900-4065RARebuild kits (rebuilds 4 rocker arms) ..........................90-4104Rocker arm bushing (3/4" long) .............USA 1,2,3TÜV 1,2,3,4,5,6,790-4014Rocker arm shaftsSet (includes 4) ......................................USA90-4036Individual (H-D® #17611-83) ..............................USA90-4006900-4065A90-4036S&S rocker arm shaft setS&S ®STANDARD FORGED ROCKER ARMSAn economical solution for stock rebuilds and mild performance upgrades. S&S standardrocker arms are forged from 8620 steel for greater strength than stock forged or cast steelrocker arms. In addition, they feature the same 3/4" long rocker shaft bushings that ourS&S roller rocker arms do. Thousands of hours of engine testing have proved them to besuperior to other non-roller rocker arms.FITMENT• 1986–'12 Harley-Davidson® Sportster®• 1994–’02 Buell®• For cams with up to .585" liftFEATURES AND BENEFITS• 3/4" long brass bushings provide 50% more load bearing area than the 1/2" longbushings used in stock and other aftermarket rocker arms• Valve contact tips are induction hardened for durabilityNOTE:All reference to H-D® part numbers is for identification purposes only. We in no way areimplying that any of S&S Cycle’s products are original equipment parts or that they areequivalent to the corresponding H-D® part number shown.S&S roller rocker arms are recommended for use with cams of more than 0.585" of lift.New rocker arm shafts are recommended for maximum performance and rocker life.NOTE:Adjustable pushrods must be used with S&S roller rocker arms to obtain proper valve clearance.New rocker arm shafts are recommended for maximum performance and rocker life.KIT CONTENTS• 2 front and 2 rear rocker armsPART NUMBERSStandard Forged Rocker Arms .............................900-4119AReplacement partsFront exhaust or rear intake (H-D® #17375-83A) ................900-4119FARear exhaust or front intake (H-D® #17360-83A) ................900-4119RARocker arm bushing 3/4" long ...............USA 1,2,3TÜV 1,2,3,4,5,6,790-4014Rocker arm shaftsSet (includes 4) ......................................USA90-4036Individual (H-D® #17611-83) ..............................USA90-4006Visit us at www.sscycle.com900-4119APERFORMANCEPARTSParts forTwin Cam 96 /103 2007-2012Parts forTwin Cam 88 ®1999-2006Parts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2012Parts forVintage Engines1926-1984Parts forX-Wedge®2007-2012Parts forVictory®, Off-road& MetricRacingProductsTools & ShopSuppliesDealer Services& Promo ItemsWarranty &Company PolicyOEM Cross ReferenceAppendix & Index4-35