Mounting instruction for conversion kit Monster mod

Baja Buggy Position 20+211. Fix the front shock mount 4WD tothe reinforcing plate for the front axleby using M4x16 countersunk screws,Ø4,3 disks and M4 stop nuts.Disassemble countersunk screwM4x25 and M4 nut from the shockmount of your existing 2WD model andmount them at the front shock mount4WD.2. Mount the plastic fixing plate withbrake guide rail and alloy distancesbetween brake guide rail and reinforcingplate to the reinforcing plate forthe front axle using M4x30 cylinderscrews, disks Ø4,3 and M4 stop nuts.Position 20Parts are inbag GBaja BuggyScrew4,2x13ScrewM4x16Reinforcing platefor front axleNutM4ScrewM4x25Front shockmount 4WDStop nut M4DiskØ4,3Plastic fixingplateBrakeguiderailAlloydistancePosition 21Parts are inbag GBaja BuggyDiskØ4,3DiskØ4,3ScrewM4x30Stop nut M4Marder Position 221. Fix front shock mount 4WD to the reinforcing platefor the front axle using M4x16 countersunk screws,disks Ø4,3 and M4 stop nuts.Dismount countersunk screw M4x25 and M4 nut fromthe shock mount of your existing 2WD model andmount them in the 4WD shock mount.2. Cover the rear bore holes of the reinforcing plate forthe front axle with an adhesive tape to prevent a contaminationof the gearwheel drive.Position 22Parts are inbag GMarderFront shockmount 4WDNutM4ScrewM4x16AdhesivetapeScrew4,2x13Reinforcing bracefor front axleMarder/Baja Buggy Position 23Parts are inbag GScrewM4x25DiskØ4,3Stop nutM4Screw4,2x13Screw4,2x16Stopnut M4Front bumperScrewM4x8DiskØ4,3Screw M4x14Marder/ Baja Buggy Position 231. Fix the assembled reinforcing plate for the frontaxle on the front axle carriers using 4,2x13 pan-headscrews.2. Mount the front shock absorbers at the front lowerwishbones using M4x14 cylinder screws, then fix thetop of the shock absorber with M4 stop nuts.3. Assemble the front bumper with M4x8 pan-headscrews and Ø4,3 disks to the alloy chassis and with4,2x16 pan-head screws at the front axle carriers.