Mounting instruction for conversion kit Monster mod
Mounting instruction for conversion kit Monster mod
Mounting instruction for conversion kit Monster mod
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Position 47Parts are inbag KKunststoffstrebe kurz<strong>Monster</strong>/Stadium <strong>mod</strong>els1. Dismount roll bar and rein<strong>for</strong>cing brace from your existing 2WD<strong>mod</strong>el.2. Mount the plastic parts <strong>for</strong> the rein<strong>for</strong>cing braces at the roll baragain using 4,2x32 pan-head screws as pictured. Push the rein<strong>for</strong>cingbraces Spoilerhalter into the plastic parts <strong>for</strong> the braces at the front shock mountand fix them using 2,9x9,5 pan-head screws.Screw2,9x9,5Rein<strong>for</strong>cing braceSchraube4,2x22AuspuffrohrPlastic part <strong>for</strong> Scheiberein<strong>for</strong>cing brace Ø4,3Schraube4,2x13Halterung fürAuspuffrohrDämpferplattehinten 4WDRoll barSchraubeM6x75Alloy chassis Baustufe 50Teile sind inBeutelScrew Baja4,2x163. Mount the roll bar to the alloy chassisusing 4,2x16 countersunk screws.Rein<strong>for</strong>cing braceScrew4,2x32Screw2,9x9,5Screw2,9x9,5Plastic part <strong>for</strong>rein<strong>for</strong>cing bracePosition 481. Disassemble the left and right alloy side plates from your existing 2WD <strong>mod</strong>el and mount them tothe alloy chassis using M4x8 pan-head screws. Fix the left and right alloy side plates to the frontshock mount using 4,2x16 pan-head screws, Ø4,3 disks and plastic bushes 4/6x5.2. Fasten the left alloy side plate with M6x75 cylinder screw, Ø6,4 disk and alloy distance 10x34.3. Fasten the right alloy side plate with M4x45 cylinder screw, Ø4,3 disk and alloy distance 8x27.4. Dismount the complete rear spoiler mount from your existing 2WD <strong>mod</strong>el and fix it at the rear shockmount 4WD by using M4x20 cylinder screws and M4 stop nuts. Spoiler mount and rear body mountscan differ <strong>for</strong> Hummer, Jeep and Beetle Pro <strong>mod</strong>els.5. Mount the long plastic braces with 4,2x32 pan-head screws and roll bar.<strong>Monster</strong>/Stadium <strong>mod</strong>elsScrew4,2x32Plastic bracelongAlloy sideplate rightRoll barPlasticbush4/6x5mmDiskØ4,3Screw4,2x16Allloy distance10x34Alloy sideplate leftAlloy chassisSide bodymountScrewM4x8If necessary file the side plates here slightly tomake sure the track rods do not pile whilesteering. Treat the other side in the same way.ScrewM4x8If necessary file the boring to a long slot.Treat the other side in the same way.Disk Ø6,4Cylinder screwM6x75Mount exhaust pipe from yourexisting 2WD <strong>mod</strong>el.
Change language