Eternity - Manual - 32-29 DVD .indd - UMC - Slovakia

Attaching / detaching the stand and wall mountingDETACHING THE STANDThis television requires a VESA 400 x 200 wall mount, or equivalent.Detaching the Stand1) Remove the 4 screws highlightedIMPORTANT - Before drilling any holes in the wall ensure you are not drillingwhere there could be any electric wires, water or gas pipes.Wall mounting the TV1) Remove the four screws highlighted below.2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holesare indicated in the picture below.For optimum viewing, if wall mounting the TV higher than eye level,the TV should be tilted downwards so that the TV’s screen is ‘face on’.See fig 1 and 2fig 1Viewing angleTVfig 2TVImportant – If wall mounting this TV, onlyuse the screws already provided in the wallmounting holes. Using other screws whichare longer could cause irreparable damage tointernal parts.Viewing angleIMPORTANT NOTE. Occasionally we may release new software/firmwareupgrades/enhancements for this television. Please check the ‘firmwareupgrade’ section of the website regularly.9Eternity - Manual - 32-29 DVD .indd Sec1:95/14/2010 10:26:24 AM