Directional Control Air Valves & Accessories

SERIES A VALVESSolenoid Controlled / Pilot OperatedReliably rapid response is inherent to the Series A valve’s design concept. The lowfriction operation, short spool travel and low mass spool all represent constructionfeatures that make fast response possible.Equally important, this fast response is repeatable. It does not fluctuate whendegree of lubrication, operating pressure or internal valve back pressure vary.Fast, repeatable response translates into immediate benefits for the machinedesigner. Now, machine cycle rates can be increased to match the valve’s instantresponse to control signals.Horizontal and Vertical Solenoid OperationSolenoid/Pilot operators are available in either horizontal or vertical configurationsto accommodate varying space limitations.The horizontal model is usually used for sub-base and cylinder mounting; thevertical for manifold mounting since it provides access to the manifolds side cylinderports.Series A solenoid operators offer a wide variety of voltages and frequencies; all coilsare continuously rated, and continous cycle rates up to 300 CPM can be maintained.Options• Molded coils• Locking type manual override• Two position detent (adds 5/8” to overall length)• 1/4 NPT threaded pilot exhaust adapter• External pilot supplyModel 7900, SingleHorizontal Solenoid/Pilot OperatedNOTE: Three position open or closed center valves are available as special assemblies.Consult factory.HorizontalModel 7980, DoubleHorizontal Solenoid/Pilot OperatedVerticalModel 8060, SingleVertical Solenoid/Pilot OperatedModel 8065, DoubleVertical Solenoid/Pilot Operated10