Directional Control Air Valves & Accessories

AUTOMOTIVE INDY SERIES VALVESTHE ULTIMATE in HIGH PERFORMANCEWith a solid state circuit board, air-assisted return, sturdy seals,and an innovative tri-power system, Alkon’s Indy Series deliversconsistent, reliable performance - even in the most hostileenvironments. Indy’s non-locking manual override allows fortooling setup and exceptional cyclability. Solid state technologyhas replaced all internal wiring with a printed circuit board design.It incorporates a built-in surge suppressor, a plug-in solenoid,solid state LED, and is PLC compatible.Alkon’s air relay technology maximizes valve speed whilesimultaneously reducing power consumption. Our patented“thin lip” seals are fabricated from PTFE-loaded Viton. Thiscombined with Indy’s innovated end seals provide a dirt-tolerant,positive air tight seal assuring the user millions of cycles of highlyreliable operation.FEATURESTri-Powered: The Indy incorporates a low watt solenoid pilotvalve, Alkon’s air relay technology and an air assisted spring returnto virtually guarantee valve function - every time.Maximum Flow: The Indy series of air valves have the highestflow ratings in the industry.Speedy “Pits” and Changeovers: Spool replacement is easyjustremove the end cap and slide in a new pre-lubed spool.Fast Response: Air-assisted return, air relay technology, and thetri-power system guarantee fast valve response on every cycle.Low Maintenance: The solid state circuit board and easy-toreplacespool substantially reduce the need for maintenance on theIndy series.Low Power Consumption: The Indy’s air pilot solenoid, lowwatt coil, and built-in air relay technology provide maximumperformance with a minimum of power.Multiple Voltage Options: You will always have the right valveon your team with this Indy feature. One valve, one connector for24VDC to 120VDC and 48VAC to 120VAC.Wiring Options: Other pin combinations are available in additionto automotive versions.Reduced-Wear Components: A wear-resistant thin lip pistonalong with the Indy’s rugged end seals help to ensure that the Indyis a dependable, long lasting air valve system.Warranty: 5-years for defects in material (including solenoids)and workmanship; soft seals warranteed for 18 months as normalwear parts.68