Directional Control Air Valves & Accessories

More documents

Recommendations

Info

SERIES P VALVESLAPPED SPOOL VALVESThe heart of the Series P valve is the packless bodyand spool assembly constructed of aluminum witha ceramic hard aluminum oxide finish. This uniquecartridge and spool assembly is completely isolatedfrom external forces; is pressure balanced, allowingany port to be pressurized or subjected to backpressure with no effect on shifting force, and hasbeen designed to meet the most stringent requirementsthat today’s customers demand. All SeriesP valves are inline, and all can be manifolded. Thisseries is manufactured to the highest quality standardsin the industry today and all carry a three yearwarranty on all parts of the valve, including the coil.No lubrication; extremely fast shifting coupled withvery low minimum pilot pressure, a variety ofoptions and all at a low cost.CONSTRUCTION:• Body, End Caps & Manifolds: AnodizedAluminum• Cartridge & Spool: Hard Coated Aluminum• Coils: Molded Nylon• O-Rings: Buna N (Nitrile)LUBRICATION:NONE REQUIRED - However a general purposelubricating oil may be used if desired. In thesecases, we recommend ASTM/ISO viscosity GradeFILTRATION:A 40 micron filter is recommended.32.WARRANTY:Series P valves are covered by a three yearwarranty from date of purchase.Series A & Spriteare covered by a 90-day warranty. All provisionsof our standard warranty policy (available uponrequest) apply.OPERATING PRESSURES:• Internal Pilot (Standard): 10 P.S.I. to 150 P.S.I.• External Pilot: Vacuum to 150 P.S.I.NOTE: External Pilot Supply of at least 10 P.S.I.required for vacuum service.MOUNTING:All Series P <strong>Valves</strong> have no limitations as far asthe orientation of the valve. Coils can be rotatedin any direction for ease of installation.CYCLE RATE:Series P <strong>Valves</strong> may be cycled at over 2000cycles per minute in most applications.OPTIONS:Include hard wired coils; factory assembly ofvalves to manifolds; a variety of plug connectors;pre-installed AQ push-in fittings, and many otherpopular options.SERIES A & SPRITE VALVESSeries P Spool AssemblyAlkon Series A and Sprite II valves have been designed to comply with the ever more stringentrequirements for increased production rates through higher speeds and component reliability.The heart of these valves is a packless spool body and spool assembly constructed of aluminumwith a ceramic hard aluminum oxide finish. Ground and matched to precision tolerances, its operationis virtually frictionless.Benefits of this packless design begin with the elimination of dynamic seals and their incumbentdifficulties. Fast response allows increased machine cycle rates; non-lube operation reduces scheduledmaintenance requirements. The body and spool assembly is pressure balanced, allowing any port tobe pressurized or subjected to back pressure with no effect on spool shifting force. Exhaust portmufflers or speed controls may be used with no effect on valve response.The unique body and spool assembly has been completely isolated from external forces by use of apatented 3-point suspension. This assembly, coupled with a complete variety of actuators andmounting alternatives, provides the highest level of performance and versatility found in the air valveindustry.12VALVE FEATURES• Packless design• Fast Response• Operate with or without lubrication• Can be subbase, manifold or cylinder mounted
SERIES P-FW/MW MINIATURE 3-WAY VALVESGENERAL INFORMATION:• Anodized Aluminum Body for acorrosion resistant, lightweightpackage• Mount as a single station valve orstack into a manifold of up to 15stations• Options include hard wired coils,non-locking manual override anda variety of plug connectors• Can easily be converted to a twowayvalve simply by plugging theexhaust port• Coils can be rotated in 90 oincrements• Choice of two flow modelsSPECIFICATIONS:• Operating Temperature:0 o to 125 o• Operating Pressure:Vacuum to 150 P.S.I.• Cv Rating:FW Cv .085 (Approx. 4 SCFM)MW Cv .16 (Approx. 8 SCFM)• Weight:Approximately 4.3 oz• Normally closedPFWPMW.085 Cv.160 CvFEATURES:• Choice of 1/8 NPT or1/4 NPT• Standard Locking TypeManual Override• Direct Acting Solenoid• Three Year Warranty• Bottom mounting holesSERIES P-FW/MW MINIATURE 3-WAY VALVESPART # A B C Sq. D E F G H J KP-FW1/MW1 .766 .422 1.000 .094 3.250 .562 .125 .500 1/8 NPT 1/8 NPTP-FW2/MW2 1.000 .500 1.125 .125 3.593 .625 .125 .625 1/4 NPT 1/4 NPTSIMPLE HOW-TO-ORDER INSTRUCTIONSP- FW1 S S 115/60 N LSERIES MODEL FUNCTION VOLTAGE OPTIONSP FW1 SS 6 VDC 24/60 NL - Non Locking OverrideFW2 12 VDC 115/60 N4 - Nema 4 OperatorMW1 24 VDC 230/60 FA - Factory Assembly StackMW2 (Specify # of Stations)Plug Connections: See P-070/140 on Page 732
Page 1: DIRECTIONAL CONTROLDIRECTIONAL CONT
Page 5 and 6: SERIES P-035 4-WAY VALVES• 1/8 NP
Page 7 and 8: SERIES P - 4 WAY VALVESDIMENSIONSMO
Page 9 and 10: SERIES PM 3-WAY VALVESNormally Clos
Page 11 and 12: SERIES A VALVESSolenoid Controlled
Page 13 and 14: SERIES A VALVESAir Bleeder Operated
Page 15 and 16: SERIES A VALVESSolenoid / Pilot Val
Page 17 and 18: SPRITE VALVESIt Has Construction Ex
Page 19 and 20: SPRITE VALVESMultiple Manifold Moun
Page 21 and 22: FLOW CONTROLSIn-Line Flow Controls,
Page 23 and 24: FLOW CONTROLSMODEL NO.BRASSBODYIN-L
Page 25 and 26: OMNI SERIES VALVESENGINEERING DATA
Page 27 and 28: OMNI SERIES VALVESENGINEERING DATA
Page 29 and 30: OMNI 150 SERIES VALVES Flow Rating:
Page 31 and 32: OMNI 150 SERIES VALVESNew “Flip-O
Page 33 and 34: OMNI 250 SERIES VALVESAir Pilot Ope
Page 35 and 36: OMNI 250 SERIES VALVESSolenoid Air
Page 37 and 38: OMNI 250 SERIES VALVESStacking and
Page 39 and 40: OMNI 250 SERIES VALVESReplacement P
Page 41 and 42: OMNI 375 SERIES VALVESOPERATOR NUMB
Page 43 and 44: OMNI 375 SERIES VALVESBasic Valve M
Page 49 and 50: OMNI 375 SERIES VALVES3 Position Va
Page 51 and 52: OMNI 375 SERIES VALVESOrder Numbers
Page 53 and 54:
OMNI 375 SERIES VALVESManifold Valv
Page 55 and 56:
OMNI 375 SERIES VALVESReplacement P
Page 57 and 58:
OMNI 500 SERIES VALVESThe OMNI 500
Page 59 and 60:
STAINLESS STEEL 316 SERIESPOWER & C
Page 61 and 62:
STAINLESS STEEL 316 SERIESENGINEERI
Page 63 and 64:
MINI BAZOOKA LOC-MASTER ®Mini Bazo
Page 65 and 66:
MINI BAZOOKAMINI BAZOOKA is a 3-Way
Page 67 and 68:
BIG BAZOOKABIG BAZOOKA with a Cv of
Page 69 and 70:
AUTOMOTIVE INDY SERIES VALVESTHE UL
Page 71 and 72:
INDY AU-1Solenoid OperatedFEATURES:
Page 73 and 74:
INDY AU-5Solenoid OperatedFEATURES:
Page 75 and 76:
INTERPOSED REGULATORS for AU-1 & AU
Page 77 and 78:
INDY ORDERING INFORMATION76
Page 79 and 80:
PROPORTIONAL CONTROL VALVES“MASTE
Page 81 and 82:
PROPORTIONAL CONTROL VALVESCONNECTO
Page 83 and 84:
DETROIT LINEEngineering Data for al
Page 85 and 86:
DETROIT LINE84
Page 87 and 88:
DETROIT LINE FOR GLASS INDUSTRYAIR
show all

Directional Control Air Valves & Accessories

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?