Directional Control Air Valves & Accessories

Model A 7902,SingleSolenoidPilot OperatedSERIES A VALVESSprite Valve ActuatorSPRITE solenoid/pilot operators are available for single or double actuationapplications in horizontal configurations.The SPRITE actuator offers lapped -spool reliability in both valve and operator,providing a maintenance-free product life measured in multi-millions of cyclescurrently unobtainable from standard pilot/solenoid operators.Offered in a wide variety of voltages and frequencies; all coils are rated forcontinuous or maintained signal service and continuous repeatable cycle ratesin excess of 3000 CPM are possible. Molded coils are standard and solenoidhousings meet most JIC and NEMA IV criteria. Non-locking manual override isstandard.Options• Two position detent (adds 5/8” to overall length)NOTE: Three position open or closed center valves are available as special assemblies.Consult factory.Model A 7982,Double SolenoidPilot OperatedModel 7984Single PilotOperatedAir PilotIn applications where electrical controls are not suitable, or where they arehazardous, air pilot operated valves can be used. These valves can also be appliedfor special purpose circuitry such as sequencing or timing operations.Since the low friction characteristics of the body and spool assembly requires only.50 psig to shift, vacuum can be considered as a signal source. Air pilot operatedvalves, do however require external valves to supply the required signal pressure.Options• Two position detent (adds 5/8” to overall length)NOTE: Three position open or closed center valves are available as special assemblies.Consult factory.Model 7986Double PilotOperated11