Directional Control Air Valves & Accessories

INDY TECHNICAL INFORMATIONINDY AU SERIES OPERATING SPECIFICATIONS• Media: Air and inert gasses• Filtration: 40 microns• Pressure Range:Pilot Air - Maximum 30 psig to 150 psig and not lessthan main air supply. Vacuum to 30 psig available.Main Supply - 30 to 150 psig (standard)• Temperature: 0 o to 180 o F• Flow Capacity: 1.4 to 12.5 Cv• Lubrication: All valves are prelubricated and willoperate with dry air (no additional lubrication required)However, a lubricated system will greatly extend theservice life of any valveELECTRICAL:AU-1 & AU-2 Electrical CharacteristicsStandard Voltage Inrush Current Holding Current Power120 VAC 50/60 Hz 60mA 50mA 6 watts24 VDC 60mA 60mA 1.44 wattsAU-1 & AU-2 Multiple Voltage Electrical CharacteristicsStandard Voltage Inrush Current Holding Current Power24 - 120 VDC 55mA + 10% 50mA + 10% Actual Voltage x .05548 - 120 VAC 50/60 Hz 125mA + 25% 50mA + 10% Actual Voltage x .055AU-5 Electrical CharacteristicsStandard Voltage Inrush Current Holding Current Power110 VAC 50/60 Hz 130mA 80mA 8.8 watts120 VAC 50/60 Hz 110mA 70mA 8.4 watts240 VAC 50/60 Hz 60mA 30mA 7.2 watts24 VDC 290mA 290mA 6.9 watts120/60 Hz can be connected to 110/50 Hz.Encapsulated coils are standard.All solenoids are designed to meet or exceedUL and CSA standards.Coils are rated for continuous duty.75Cv Conversion to S.C.F.M.Cv P.S.I.G. S.C.F.M.1 40 271 50 321 60 371 70 421 80 471 90 521 100 57