Xilinx pg013 LogiCORE IP RGB to YCrCb Color-Space Converter v5 ...

More documents

Recommendations

Info

Graphical User Interface• Minimum and Maximum Values: Similar to offset values, the edit-boxes take unsignedinteger values in the range permitted by the current output representation.X-Ref Target - Figure 3-3Figure 3-3:RGB to YCrCb Color-Space Converter, EDK GUI ScreenDefinitions of the EDK GUI controls are identical to the corresponding CORE Generator GUIfunctions.RGB to YCrCb Color-Space Converter www.xilinx.com 28PG013 April 24, 2012
Parameter Values in the XCO FileParameter Values in the XCO FileTable 3-1 defines valid entries for the XCO parameters. Xilinx strongly suggests that XCOparameters are not manually edited in the XCO file; instead, use the CORE Generatorsoftware GUI to configure the core and perform range and parameter value checking. TheXCO parameters are helpful in defining the interface to other Xilinx tools.Table 3-1:XCO ParametersXCO Parametercomponent_nameDefault Valuesv_rgb2ycrcb_v5_00_a_u0s_axis_video_data_width 8acoef 0.299bcoef 0.114ccoef 0.713dcoef 0.564cbmin 16cbmax 240cbmin 16crmax 16crmin 240ymax 240cboffset 128croffset 128yoffset 16has_clamphas_clipinput_rangestandard_seltruetrue16_to_240_for TVSD_ITU_601active_cols 1920active_rows 1080has_axi4_litehas_debughas_intc_iffalsefalsefalseRGB to YCrCb Color-Space Converter www.xilinx.com 29PG013 April 24, 2012
Page 1 and 2: LogiCORE IP RGB toYCrCb Color-Space
Page 3 and 4: Clock Placement. . . . . . . . . .
Page 5 and 6: LogiCORE IP RGB to YCrCbColor-Space
Page 7 and 8: Licensing• Video surveillance•
Page 9 and 10: Resource UtilizationResource Utiliz
Page 11 and 12: Core Interfaces and Register SpaceX
Page 13 and 14: Core Interfaces and Register SpaceV
Page 15 and 16: Core Interfaces and Register SpaceC
Page 17 and 18: Core Interfaces and Register SpaceT
Page 19 and 20: Core Interfaces and Register SpaceE
Page 21 and 22: Core Interfaces and Register SpaceC
Page 23 and 24: Core Interfaces and Register SpaceT
Page 25 and 26: Graphical User InterfaceThe main sc
Page 27: Graphical User InterfaceThe previou
Page 31 and 32: Chapter 4Designing with the CoreGen
Page 33 and 34: Color-Space Conversion BackgroundYU
Page 35 and 36: Color-Space Conversion BackgroundCC
Page 37 and 38: Color-Space Conversion BackgroundHa
Page 39 and 40: Color-Space Conversion BackgroundTh
Page 41 and 42: Clock, Enable, and Reset Considerat
Page 43 and 44: System ConsiderationsARESETnThe RGB
Page 45 and 46: Chapter 5Constraining the CoreRequi
Page 47 and 48: Chapter 6Detailed Example DesignNo
Page 49 and 50: Directory and File Contents• run_
Page 51 and 52: InteroperabilityInteroperabilityThe
Page 53 and 54: Appendix CDebuggingIt is recommende
Page 55 and 56: Debugging FeaturesTable C-2:Trouble
Page 57 and 58: Interfacing to Third-Party IPOften
Page 59 and 60: Appendix DApplication Software Deve
Page 61 and 62: Programmer’s GuideRGB_AutoSyncRes
Page 63 and 64: Appendix EC-Model ReferenceInstalla
Page 65 and 66: Using the C-ModelTable E-2:C-Model
Page 67 and 68: Using the C-ModelTable E-4: Member
Page 69 and 70: Using the C-Modelthe video mode val
Page 71 and 72: Compiling with the RGB to YCrCb C-M
Page 73 and 74: ReferencesReferencesThese documents

Xilinx pg013 LogiCORE IP RGB to YCrCb Color-Space Converter v5 ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?