Xilinx pg013 LogiCORE IP RGB to YCrCb Color-Space Converter v5 ...

Running the SimulationRunning the Simulation• Simulation using ModelSim for Linux:From the console, Type "source run_mti.sh".• Simulation using iSim for Linux:From the console, Type "source run_isim.sh".• Simulation using ModelSim for Windows:Double-click on "run_mti.bat" file.• Simulation using iSim:Double-click on "run_isim.bat" file.Directory and File ContentsThe directory structure underneath the top-level folder is:• expected:Contains the pre-generated expected/golden data used by the test bench to compareactual output data.• stimuli:Contains the pre-generated input data used by the test bench to stimulate the core(including register programming values).• Results:Actual output data will be written to a file in this folder.• Src:Contains the .vhd simulation files and the .xco CORE Generator parameterization file ofthe core instance. The .vhd file is a netlist generated using CORE Generator. The .xcofile can be used to regenerate a new netlist using CORE Generator.The available core C-model can be used to generate stimuli and expected results for anyuser bmp image. For more information, refer to Appendix E, C-Model Reference.The top-level directory contains packages and Verilog modules used by the test bench, aswell as:• isim_wave.wcfg:Waveform configuration for ISIM• mti_wave.do:Waveform configuration for ModelSimRGB to YCrCb Color-Space Converter www.xilinx.com 48PG013 April 24, 2012