PicC 9.50 dsPIC Manual.pdf

Linker and UtilitiesCrefTable 5.5: CREF command-line optionsOption-Fprefix-Hheading-Llen-Ooutfile-Pwidth-Sstoplist-XprefixMeaningExclude symbols from files with a pathname orfilename starting with prefixSpecify a heading for the listing fileSpecify the page length for the listing fileSpecify the name of the listing fileSet the listing widthRead file stoplist and ignore any symbolslisted.Exclude and symbols starting with prefix5.12.1 -FprefixIt is often desired to exclude from the cross-reference listing any symbols defined in a system headerfile, e.g. . The -F option allows specification of a path name prefix that will be used toexclude any symbols defined in a file whose path name begins with that prefix. For example, -F\will exclude any symbols from all files with a path name starting with \.5.12.2 -HheadingThe -H option takes a string as an argument which will be used as a header in the listing. The defaultheading is the name of the first raw cross-ref information file specified.5.12.3 -LlenSpecify the length of the paper on which the listing is to be produced, e.g. if the listing is to beprinted on 55 line paper you would use a -L55 option. The default is 66 lines.5.12.4 -OoutfileAllows specification of the output file name. By default the listing will be written to the standardoutput and may be redirected in the usual manner. Alternatively outfile may be specified as theoutput file name.109