PicC 9.50 dsPIC Manual.pdf

Error and Warning Messages(427) syntax error in checksum list (Objtohex)There is a syntax error in a checksum list read by OBJTOHEX. The checksum list is read fromstandard input in response to an option.(428) too many segment fixups (Objtohex)This is an internal compiler error. Contact HI-TECH Software technical support with details.(429) bad segment fixups (Objtohex)This is an internal compiler error. Contact HI-TECH Software technical support with details.(430) bad checksum specification (Objtohex)A checksum list supplied to OBJTOHEX is syntatically incorrect.(433) out of memory allocating * blocks of * (Linker)This is an internal compiler error. Contact HI-TECH Software technical support with details.(434) too many symbols (*) (Linker)There are too many symbols in the symbol table, which has a limit of * symbols. Change someglobal symbols to local symbols to reduce the number of symbols.(435) bad segspec * (Linker)The segment specification option (-G) to the linker is invalid, e.g.:-GA/f0+10Did you forget the radix?-GA/f0h+10(436) psect "*" re-orged (Linker)This psect has had its start address specified more than once.(437) missing "=" in class spec (Linker)A class spec needs an = sign, e.g. -Ctext=ROM See Section 5.7.9 for more infomation.281